Handy 3d prints for the workshop

[DAPPH]

If that's a Dcell it's too big for what I have in mind.
Fitting them inside my fishing tackle seat legs and kids bike seat tubes.

Are these any good ...
Ready made water proof cable joints minus the guts ?
IIRC they can be 10 to 20 mm in dia including the 17 mm AF nut caps . The joints I made using them 10 or more years ago are still water tight . Plus I've had to undo two to change the out put cable & LED PIR light fitting but they are stil water tight .

Ebay # 353084226974

 

[ukracer]

Are these any good ...
Ready made water proof cable joints minus the guts ?
IIRC they can be 10 to 20 mm in dia including the 17 mm AF nut caps . The joints I made using them 10 or more years ago are still water tight . Plus I've had to undo two to change the out put cable & LED PIR light fitting but they are stil water tight .

Ebay # 353084226974

I might have confused you. I need the GPS in a slender thin container as well.

 

[cr500dom]

If that's a Dcell it's too big for what I have in mind.
Fitting them inside my fishing tackle seat legs and kids bike seat tubes.

What ID are you thinking ?
And what battery ?

 

[cr500dom]

Not knocking the Fortus at all but it’s worth bearing in mind you can get results just as good without spending that much these days. The amount of development in even the last couple of years is dramatic.

Large format UV SLA printers (and the range of resins!) maybe most of all.

We have 3 Stratasys printers and are about to buy a 4th
Fortus450
F370
J55 polyjet
I know there are cheaper options out there but these are industrial grade printers with superb material capability and fantastic support.
We’ve not had a single failed print since they’ve been installed either.

 

[cr500dom]

We have 3 Stratasys printers and are about to buy a 4th
Fortus450
F370
J55 polyjet
I know there are cheaper options out there but these are industrial grade printers with superb material capability and fantastic support.
We’ve not had a single failed print since they’ve been installed either.

The Fortus goes open source for material shortly too

 

[ukracer]

What ID are you thinking ?
And what battery ?

Not got as as far as measuring up yet. Lol. It was just a pie in the sky idea I have had for a while. I will do some measuring up once I have this carpet fitted.