Stuff you have fixed today

[MattF]

Fixed SWMBO`s horsebox headlamp in exchange for not being turned to stone and being allowed to sleep with both eyes shut for at least one night.

 

[The_Yellow_Ardvark]

Fixed SWMBO`s horsebox headlamp in exchange for not being turned to stone and being allowed to sleep with both eyes shut for at least one night.

Goons with tractors smashed it pulling stuck horseboxes out of a showground, £250 worth of headlamp later


View attachment 302304

View attachment 302303

Was that price for an OE unit?
The OE used to do a replacement glass, I guess that has stopped now?

 

[8ob]

Was that price for an OE unit?
The OE used to do a replacement glass, I guess that has stopped now?

They may do just the glass, I ordered the headlamp unit fron Scania and it was thrown over the gate about an hour later

 

[Tinbasherdan]

not suprised its hissing down and thundering here just what i wanted .had to water a load of grass i sown 5 weeks ago every nite with no rain apart from 2 days apart from that fixed 4 large mirrors on walls at a job im doing electrical work at i dont mind getting a good rate for it

It’s back tonight with a post knocker on so I can run some stock fence out tomorrow

 

[Maker]

Fixed the blocked drain;




Definitely need a far more powerful pressure washer but it did the trick.

 

[Bobupndown]

Replaced intercooler hose on my Freelander 2 after limp mode reared its head on the motorway on Saturday. Had to take entire front end off to get at it though.

 

[dan.taylor.1]

Replaced intercooler hose on my Freelander 2 after limp mode reared its head on the motorway on Saturday. Had to take entire front end off to get at it though.
View attachment 303170
View attachment 303169

Had mine blow off once or twice, new good jubilee clip sorted it. I could get at both clips from underneath, was yours in a daft place?

 

[Bobupndown]

Had mine blow off once or twice, new good jubilee clip sorted it. I could get at both clips from underneath, was yours in a daft place?

Yes, hose clip onto bottom of intercooler was fitted in such a way it was impossible to get onto it from below hence bumper removal. Not difficult just a bit more hassle for something which should have been easy. Top hose blew off when I took it for a test drive, obviously hadn't tightened it enough. All sorted now ✌

 

[northwest]

Went to fit the new steel door at my pals yesterday and ended up helping him with this. He had loaned it out, let this be a lesson (or a reminder) why you shouldn't loan tools or equipment:



This, well slightly more actually, is what came out of it:

 

[dobbslc]

Nasty!
I lent my mixer to a neighbour and told him not to overload it and keep it clean, it came back in better condition than it went in.

 

[eLuSiVeMiTe]

Looked fine until I removed it

Only allowed for frame lowers on this one

 

[indy4x]

Been meaning to sort out this for a while, its a micrometer stop for a Harrison M300

No before pics soz, it was grimey and gunged up with old grease/oil plus some surface rust, dunked it in the ultrasonic cleaner followed by a quick rub over with scotchbrite and WD-40 and its come up lovely



While I was at it, I did the same to this one



Yeah, I know, having 2 is a bit greedy so maybe time to let 1 go

 

[nickk]

The previously,2012,adapted long reach retaining bolt for this die,eventually sheared,so had to be drilled out,on centre,so I’ve resorted to a short m10 that won’t flex and sacrificed rotating room.
I used a long reach slot drill of the correct diameter,to centralise the drill first.

 

[slim_boy_fat]

Been meaning to sort out this for a while, its a micrometer stop for a Harrison M300

No before pics soz, it was grimey and gunged up with old grease/oil plus some surface rust, dunked it in the ultrasonic cleaner followed by a quick rub over with scotchbrite and WD-40 and its come up lovely

View attachment 303672

While I was at it, I did the same to this one

View attachment 303673

Yeah, I know, having 2 is a bit greedy so maybe time to let 1 go

@Rannsachair

 

[eLuSiVeMiTe]

Long overdue a sharpen.

Il check the plane irons next weekend.

Short chisel was a casualty of war. Teach me for popping skirting boards off with it

 

[eLuSiVeMiTe]

Long overdue a sharpen.

Il check the plane irons next weekend.

Short chisel was a casualty of war. Teach me for popping skirting boards off with it

View attachment 303792

Whoops. I missed a chisel lurking.

Building a new box to house them all soon. That one's lasted 6 years

 

[brightspark]

Went to fit the new steel door at my pals yesterday and ended up helping him with this. He had loaned it out, let this be a lesson (or a reminder) why you shouldn't loan tools or equipment:

View attachment 303176

This, well slightly more actually, is what came out of it:

View attachment 303177

i had similar had to get most out with a kango hammer then shotblast and paint it . its come up like brand new again i lent a mate it and said i want it to come back without a spec of cement on it and told him to clean behind the paddles . it came back mint as it went out

 

[8ob]

Went to fit the new steel door at my pals yesterday and ended up helping him with this. He had loaned it out, let this be a lesson (or a reminder) why you shouldn't loan tools

I have fixed that problem, bought some new mixers last year and they go out on the proviso that they come back spotless and I mean spotless or it becomes "their mixer". Its strange how clean they return them now if there will be a £450 dent in their paypacket if they dont.

Bob

 

[brightspark]

i bought 2 bell mixers 40- years ago and used to hire them out paid 150 quid each for them brand new one petrol one electric both still in mint condition and not a dent or mark on them .the petrol ones hardly used but the leccy one has done a lot of work the gearbox went on it as the earlier ones had a cast iron gearbox and were a bit iffy and it went so it got replaced with the newer aluminium cased one

 

[Blobber]

Had this mower for about 20yrs, its had a hard life but ive only put 1 carb diaphragm in it and piece of cord for the pull start but I detected a wobbly rear wheel on its last outing

Ahh that doesnt look right! we have the technology though to get a bit more life out of it, blob away!

Found a bit of round nylon bar and added a bit of support

Better check the other side, yep thats on its way too

All back together now, I was pleased how well the rest of it was made with steel drive gears for the wheels and some nice
sealed bearings all of which were in great condition

Around the garden we have post and rail fencing which is a pain as the mower keeps wanting to go under the bottom rail
so your having to drag it out and reposition it, a bit more of the nylon bar fixed to the deck which will hopefully act as a guide!

Just got to wait for the dry weather/sun shine now.....