Bankers Lamp or Navt Desk Lamp.The desk lamp is also UK made I think
You filed the square hole out then?Got a nice rount tuit this evening:
View attachment 331615
My wire EDM hasn't materialised yet so I did it the old fashioned way, with square drill bits.
I've had a disc stuck on my 9" grinder for about two years, I very rarely use it but when I do it's cutting concrete, with water to keep the dust down, so no wonder it seized. Bent the original spanner, couldn't get a good hold with mole grips and a punch and hammer was too awkward do while holding the spindle lock.
View attachment 331616
Spun it off in seconds.
Jeepers, why not just put the disc in the vice, hammer and pin punch, bin the disc?Got a nice rount tuit this evening:
View attachment 331615
My wire EDM hasn't materialised yet so I did it the old fashioned way, with square drill bits.
I've had a disc stuck on my 9" grinder for about two years, I very rarely use it but when I do it's cutting concrete, with water to keep the dust down, so no wonder it seized. Bent the original spanner, couldn't get a good hold with mole grips and a punch and hammer was too awkward do while holding the spindle lock.
View attachment 331616
Spun it off in seconds.
Yep, hard work in en24t.You filed the square hole out then?
Didn't think of it.Jeepers, why not just put the disc in the vice, hammer and pin punch, bin the disc?
Fjr1300 engine into Slag
View attachment 331506
I did not let a heavy shower stop me. Waterproofing has been considered! I did add a weighted tarp after... It was starting to glow and just as I was about to add metal in the pot.
View attachment 331514
View attachment 331516
I did intend to add another two peices 500g worth, but for some unexplained reason the house RCD tripped, but then was fine after resetting Landlord was not happy, even though it was only off 20 seconds.
View attachment 331517
Fell out the tube nicely, quite happy with the result. Plan to turn this first, and might cross section to get an idea of porosity.
View attachment 331518
I've just put the nut in the vice and rotated the grinderJeepers, why not just put the disc in the vice, hammer and pin punch, bin the disc?
You need swinging from the rafters by a rope tied to your 80ll0cks for that crimeFjr1300 engine into Slag
View attachment 331506
I did not let a heavy shower stop me. Waterproofing has been considered! I did add a weighted tarp after... It was starting to glow and just as I was about to add metal in the pot.
View attachment 331514
View attachment 331516
I did intend to add another two peices 500g worth, but for some unexplained reason the house RCD tripped, but then was fine after resetting Landlord was not happy, even though it was only off 20 seconds.
View attachment 331517
Fell out the tube nicely, quite happy with the result. Plan to turn this first, and might cross section to get an idea of porosity.
View attachment 331518
A pile of segments rolled for @grim_d .View attachment 331630