Stuff you have made today

[prepman]

I avoid pipework as much as I can, but it's inevitable sometimes. So made myself a set of flange pins to suit smaller flanges that take M8 to M12 bolts. Need to make another set, for M16+ later, but they will be aluminium.

View attachment 340310

Nice Knurl

 

[selectedgrub]

Only possible with a fiery helmet....

Yes.

 

[Arc Tourist]

I've done similar when the dog's lead acted as a bolass and I crashed onto the kennel roof. It's pretty painful.

Been stuck in the house sitting and sleeping upright in a chair for the past week without being able to get much comfort. Painful yeah, but it is what it is. I have experienced much worse from other injuries in life, but fortunately I have a great Wife who is takes good care of me, so its just a matter of time. I was lucky, at least a lung wasn't pierced.

 

[God mode restorations]

So I managed to mix my tin of paint I ruined yesterday with some older paint of the same brand/colour. It's a little of semi gloss chassis black but considering the amount of thinners some div added by accident its about as good as its going to get.

 

[Maker]

I made some custom pipe fittings:



The outside tap has been annoying me for ages, it's not centred over the sink and the hose kinks where it has to run over the edge of the sink.


New tap over over sink, with a camlock outlet as it's part of my brewery;


And the old tap where the hose can get to it, plus a water meter. I've often wondered how much I waste pressure washing, etc, and I might be able to use it for measuring brewing water, it reads down to 100ml but I don't know how accurate that is.


Unfortunately the new tap, unless it's fully open, blasts a jet of water straight at your crotch, I think putting a little flow diffuser inside it will sort it. I also couldn't find any fibre washers and tried sealing the meter with copper ones, so it leaks.

 

[8ob]

Finally got the discs for my truck, made a 105mm hub nut socket out of some flat .

Chopped off the abs reluctor ring and attacked the disc retaining bolts with a gas axe X4

With a little help from persuadious

 

[Woody.v8]

Made half a dozen knackered pallets disappear, hmmm jacket potatoes

 

[fizzy]

Made half a dozen knackered pallets disappear, hmmm jacket potatoes
View attachment 340936

That's a waste. Would keep a house warm for a week

 

[RichardM]

Made half a dozen knackered pallets disappear, hmmm jacket potatoes
View attachment 340936

Better wait for the fire to die down a bit or cremo potatoes

 

[selectedgrub]

 

[Farside]

Unfortunately the new tap, unless it's fully open, blasts a jet of water straight at your crotch,

 

[Kram]

UNF taps arrived. Turned a power/water fitting with the 1/4-28 tap. I'll be using 16mm² weld cable rather than a fancy watercooled one, so it will just be crimped around with a copper tube. It will be a bloody tight fit in the handle with the denim sleeving. I had a few meters somewhere, I have lost it.

 

[Hood]

Made another rack for the bike but anodised it this time.

Also made a bit for an ice cream dispensing machine, handle fell off the last day and they were scrabbling about trying to fit it back in whilst the ice cream was merrily being dispensed

 

[Mick Annick]

Ha, ha, ha.

Multiply that by five. The woman's done my head in, hassling me.

I was referred the job, she went to sculptural cast iron company who charge £90 an hour, they said 18 month waiting list, she went to my mate turner miller. He wasn't interested, sent her to me, I wasn't interested.

Here's my quote.

I'f she wants;

10 @ 17 euros a piece 170 euros. Profit 155

20 @ 15 euros a piece 300 euros. Profit 250

30 @ 13 euros a piece 390 euros. Profit 315

I have other things to do, don't want the job, woman introduced herself as ex head of a private girls school, two classic Morgans, chateau, bitch...

Hassles me weekly.

Don't want to work for her.

Fetching, delivering, etc...

Call me evil.

Sounds just like one of my neighbours - English estate agents, own the chateau in the village, know everything…

 

[Arc Tourist]

I would so love a hiab in my life.

One day.

Great for flying an excavator in to an awkward location.

 

[RichardM]

Need to make the drive pulley for it and then back in the 4 jaw to machine the taper in the end

 

[Other Daniel]

Sounds just like one of my neighbours - English estate agents, own the chateau in the village, know everything…

Sounds remarkably familiar.

 

[Maker]

View attachment 341053

View attachment 341057

Need to make the drive pulley for it and then back in the 4 jaw to machine the taper in the end

Is that a ring of springs for bearing preload? I really like that.

 

[RichardM]

Is that a ring of springs for bearing preload? I really like that.

Yes, allows for temperature variation, both bearing outer and brass ring are a sliding fit in the housing.

 

[Farside]

Great for flying an excavator in to an awkward location.

View attachment 341054 View attachment 341055 View attachment 341056

Or lifting drowned cars and lorries...