Stuff you have made today

[selectedgrub]

Used some cherry offcuts to have my first go at Kumiko this afternoon. It's a bit gappy in places where I was clumsy with the chisel, but it all holds together with friction and I'm quite pleased with it for a first attempt.

View attachment 307087

Beautiful, thanks for sharing.

 

[Kram]

A knob.

 

[dan.taylor.1]

A knob.

View attachment 307107

View attachment 307108

Lovely work that mate.

 

[James1979]

Rushed last minute birthday present for mrs1979 inspired by @kevla nowhere as good as his but what I’d ordered hadn’t arrived so banged it out this afternoon before she got home so she’d have something in lieu of the actual present which should be here tomorrow I’m promised

Thanks for the inspiration

 

[Arc Tourist]

I think she would cherish it more as you took the time to make something special for her.

 

[James1979]

I think she would cherish it more as you took the time to make something special for her.

Hadn’t thought of it that way but she seemed pleased. Thank you.

 

[James1979]

Oh and by the way @Jacktegla, re the other thread, that rose was plasma’d. Only because i had the file and the machine both sat there. Saved me some time but didn’t need to have done it that way.

Sorry if that’s a bit cryptic to everyone else!! There’s a thread re cnc by jack at the mo - https://www.mig-welding.co.uk/forum/threads/cnc-plasma-work.115303/#post-1905957

 

[Jacktegla]

Oh and by the way @Jacktegla, re the other thread, that rose was plasma’d. Only because i had the file and the machine both sat there. Saved me some time but didn’t need to have done it that way.

Sorry if that’s a bit cryptic to everyone else!! There’s a thread re cnc by jack at the mo - https://www.mig-welding.co.uk/forum/threads/cnc-plasma-work.115303/#post-1905957

Very nice,

 

[selectedgrub]

I'd like to do a brass copper and alloy one for the striking contrast.
But they are like rocket stoves.

 

[selectedgrub]

Was going to post this in my motorcycle thread but I think people are over it now.

I was pleased you can't see the plugs.

 

[The_Yellow_Ardvark]

Just for the fun, well it was to early for beer, plus it needed to be done.

View attachment 306177

Another cobblers hammer, again a hard life.

View attachment 306178

Some times a small amout of worm damaged can be fixed, in this case I fixed it with fire.


Head was cleaned up by hand, after boiling in citric acid.
The face was polished on a off cut of canvas and metal polish.

View attachment 306179

Yes the wedge is waiting to be cleaned, but there was a name on it.


"Keen"
It is stamped in and is original to the hammer, so it be reused.

View attachment 306180

Fitted to a new shaft.
The head was blacked with my kit. But it takes a while for the de watering solution to dry.

When it is the working face will be polished.

Got round to posting the polished working faces.

 

[Kram]

Extra long drill flutes I shortened last year, thought if I turn the ends I could fit a plain shank on them and use in the er40.
Started the 16.25mm with carbide.

24mm I tried CBN which was better.

I wanted to make up some m14 x 1.5 nuts, one for a new qctp base and the other for a nicer, tool-less handle. First making up a test screw. I had the speed up a bit. I even turned the vfd stop time right down, but my reactions were slow.

No damage, realigned. Took a deep cut. Im not sure why it tore the thread, but I never liked en3 mild!

 

[MattF]

No damage, realigned. Took a deep cut. Im not sure why it tore the

It's a bugger, that moment you realise, isn't it.

 

[jerrytug]

Not exactly fixed but painted, Jotun Pilot 2 gloss, it's a bold colour but her lines wear it well. Rhubard and Custard! Only the 1st coat so far.

 

[The_Yellow_Ardvark]

Not exactly fixed but painted, Jotun Pilot 2 gloss, it's a bold colour but her lines wear it well. Rhubard and Custard! Only the 1st coat so far. View attachment 307206View attachment 307207

Looks good.
But is now the time I say:
You missed a bit?

 

[Kram]

It's a bugger, that moment you realise, isn't it.

Yes. Cant find the remains of insert. I might try some tig practise to repair the blade.

 

[Brad93]

View attachment 307199
Yes. Cant find the remains of insert. I might try some tig practise to repair the blade.

Buy an iscar and be done with it

 

[Kram]

Buy an iscar and be done with it

That was my Iscar blade. I may get another but I havent seen any offers on the 2mm N2C blades, the MSC is only 3mm? It was working very well for the last few weeks.

This mild also smashed a new sp200 insert, correct centre height and square, not going to get any more of them, too fragile.

I'll try the 3mm chinese sp300's for a while as Im running the slow pulley.

 

[eLuSiVeMiTe]

First to rack mount some synths

Second will have a synth on the top. Old akai sampler next then rack FX patchbays and audio interfaces
Amp at the bottom.

 

[Newlands]

Not exactly fixed but painted, Jotun Pilot 2 gloss, it's a bold colour but her lines wear it well. Rhubard and Custard! Only the 1st coat so far. View attachment 307206View attachment 307207View attachment 307242

Is that a Hillyard? And is at at Binfield?