- Thread starter monkeymark
- Start date
slim_boy_fat
Forum Supporter
- Messages
- 29,540
- Location
- Scottish Highlands
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,608
- Location
- Going Away.
I asked for this, I was given.
AVO Heavy Duty.
Need s a lot of TLC, the overload trip is sensitive. The meter does not swing full scale. The leads some attention.
But apart from that, it's dandy.
AVO Heavy Duty.
Need s a lot of TLC, the overload trip is sensitive. The meter does not swing full scale. The leads some attention.
But apart from that, it's dandy.
Nick67GT
Member
- Messages
- 836
- Location
- Glos UK
New in the box genuine made in Sheffield Jacobs 3a chuck.
Seized at first but a quick soak in wd40 and it's as smooth as silk! Very happy.
View attachment 215627
Mick Annick
Forum Supporter
- Messages
- 2,618
- Location
- Burgundy, France (450 miles SE of Somerset)
A new stand for my anvil. Emailed a local sawmill last week via their website to see if they would sell me a piece of tree trunk but got no reply. Drove over there yesterday - no computers to be seen anywhere in the office so no surprise that they don’t read their emails.
The very nice old lady behind the desk said to go to the yard across the road - mind the telehandlers - and have a look on the scrap heap, if I can find what I want it’s 5 euros! They only process oak, found a usable piece together with a couple of railway sleeper off cuts - their main product.
The very nice old lady behind the desk said to go to the yard across the road - mind the telehandlers - and have a look on the scrap heap, if I can find what I want it’s 5 euros! They only process oak, found a usable piece together with a couple of railway sleeper off cuts - their main product.
dobbslc
Member
- Messages
- 11,966
- Location
- Hertfordshire UK
slim_boy_fat
Forum Supporter
- Messages
- 29,540
- Location
- Scottish Highlands
In the course of 'dismantling' the linisher to give it a bit of a clean, I noticed that the previous owner had the belt on backwards, i.e. the arrows against the direction of travel.
Thinking about this and looking at how the belt is made/moves, I can't really see it matters which way round it is. Am I missing something vitally important to the efficient operation of the machine, or just being dumb....?
Farside
Badly Welded Man
- Messages
- 5,736
- Location
- Ireland
Older Kamasa stuff was quite good.
zx9
Forum Supporter
- Messages
- 5,170
- Location
- South East London
I bought a Kamasa socket set from Lewis Leathers on Great Portland Street when I was in my second year at Polytechnic of Central London that would have been in 1985. I have still got most of the AF and Whitworth sockets which have been used on old BL cars but the more frequently used MM ones are a mostly lost and replaced, I think I only split one of them and rounded off a couple. So if impetus youth proof they must have been OK.
Agroshield
Member
- Messages
- 5,405
It is to do with how the belt is scarf jointed together. In one direction, the thing you are sanding could open up the joint: in the other, it will press it shut.
Yes. Got that same set in 1981.
The ratchet broke after 20 years. I still use what I haven't lost.
Nick67GT
Member
- Messages
- 836
- Location
- Glos UK
I’ve still got 99% of my Kamasa tools from when I started my apprenticeship in 1977 plus a huge set that was my dads dating from around the same era. Mine are all stamped ‘W Germany’, which might give a clue to the actual manufacturer, whereas my dads are stamped ‘Japan’. The only problems have been with the ratchet (mechanism bust) and the water pump pliers (broke across adjustment slot due to misuse) and they were replaced without question at the time.
They’ve been used regularly over the years and I wouldn’t hesitate to recommend them based on my experience.
bigegg
Scream Not Working Because Space Make Deaf
- Messages
- 9,557
- Location
- Leeds, West Yorkshire
A boombox.
exact make and model of one i had in the late 80s, which I sold to buy an electric typewriter for mrsegg.
I must have played 1000s, if not 10s of 1000s of hours of heavy metal through it.
only bought because I recently bought a couple of cassettes of an australian pubrock band called "The Choirboys' (from ebay.Oz - never released in europe, or on CD), and had nothing to play them on since i got rid of the Lexus.
It sounds *awesome*. its amazing how much better it sounds compared to mp3s - even through a decent speaker system
exact make and model of one i had in the late 80s, which I sold to buy an electric typewriter for mrsegg.
I must have played 1000s, if not 10s of 1000s of hours of heavy metal through it.
only bought because I recently bought a couple of cassettes of an australian pubrock band called "The Choirboys' (from ebay.Oz - never released in europe, or on CD), and had nothing to play them on since i got rid of the Lexus.
It sounds *awesome*. its amazing how much better it sounds compared to mp3s - even through a decent speaker system
Last edited:
DAPPH
as dyslexik as I'm daft
- Messages
- 7,011
- Location
- Near to Cross Hands Llanelli SouthWales GB
The belts last longer the right way round as the stuff being linished run off the belt higher on to the lower belt at the join . The other way round there is a raised edge there to hit the material that's being linished .In the course of 'dismantling' the linisher to give it a bit of a clean, I noticed that the previous owner had the belt on backwards, i.e. the arrows against the direction of travel.
Thinking about this and looking at how the belt is made/moves, I can't really see it matters which way round it is. Am I missing something vitally important to the efficient operation of the machine, or just being dumb....?
Memmeddu
Member
- Messages
- 4,753
- Location
- Italia Sardegna
Here in Italy almost all mechanics used and uses Beta and I'm one of those (not a mechanic)
I do love Beta because I grown-up using them
Mine is more likely an affective factor but I reckon that tools quality isn't as same as used to be
Other Italians love USAG that was an Italian company but nowadays is part of the Stanley/black&decker group as same as facom
I personally don't like this make because design .
Mundial Is another Italian company which produced tools for Beta prior reclaimed its independence
Beta and Mundial tools are practically the same.
Another Italian company is Pastorino which I personally hate but there are people who love them
Anyway the juice of this post is
Tools are something subjective
The user is who makes the tool great or not
Someone would find a particular tool make great or not, comfortable or not, strong or not.
I personally like Beta because I do like the finish ,the shapes and how I feel their tools in my hands
But I don't like some of their products like pilers scissors and other things.
I love Knipex pilers for example
If someone asks me which tools make I would recommend , I couldn't say one
But essentially I could tell what is my experience with a particular one , and tell what I told here so essentially try various pay attention to how you feel the tools in your hands , that's the most important thing .
You can buy a snap on wrench because someone told you that are the tool Rolls Royce but if you don't feel comfortable with it ,it will be not different than a Lidl wrench in your brain .
Just an opinion I'm saying all and I'm saying nothing
Olderisbetter
Member
- Messages
- 3,741
- Location
- Wolverhampton
This turned up today from Ebay and will for now be used to garnish the wall in my man cave and the sticker will go on my tool box, It has already given a few mates a giggle so i am very happy to have a doubleboost B3LL 3ND
eLuSiVeMiTe
Member
- Messages
- 16,441
- Location
- ......
eLuSiVeMiTe
Member
- Messages
- 16,441
- Location
- ......
Another symptom of the ultra wide monitor.
Must remember to resize the screen before exporting
Must remember to resize the screen before exporting
