Today I acquired...........

[jimbo84]

This bottle opener, was used in the family pub according to the mother so at least 40 years old but more likely 50-60 years. A bit of rust underneath but otherwise fully functional.

 

[indy4x]

33% stake in a sissors lift, it's a single phase Bradbury

View attachment 240997

View attachment 240998

Pictures are actually reversed, the picture of it extended was prior to dismantling it and loading up on the trailer.

It's now sat in project garage

The other 2 parties I went shares with are my brother and father in law

 

[brightspark]

Small world, i had that exact set in my watch list.

how much I have a set same as on the right hand side but not the short ones

 

[arther dailey]

be aware who evers garage it gets errected in will be the eventual owner

 

[Shox Dr]

be aware who evers garage it gets errected in will be the eventual owner

whether he wants it or not

 

[angellonewolf]

be aware who evers garage it gets errected in will be the eventual owner

and be the mechanic for all three that own the ramp with no pay

 

[slim_boy_fat]

Already have, ordered a Jaguar I Pace through work, signed up for it before Christmas and it arrived in June.

TBH I prefer the Discovery, no, much prefer the Discovery so once the 3 years are up on the lease I'll be looking for a Discovery 4

Apologies, if I missed or forget your telling us that before?

 

[Blake's 7]

This morning I paid a visit to my local scrap yard for the first time in about two weeks and whilst there I spotted this Fronius Transpocket 1500 in a skip.



I have no idea if it's working or not yet, but I only swapped a few lead acid batteries for it in the hope that if it does need a bit of work to get it going it can be done reasonably cheaply.

Fingers crossed.

 

[Brad93]

This morning I paid a visit to my local scrap yard for the first time in about two weeks and whilst there I spotted this Fronius Transpocket 1500 in a skip.

View attachment 241215

I have no idea if it's working or not yet, but I only swapped a few lead acid batteries for it in the hope that if it does need a bit of work to get it going it can be done reasonably cheaply.

Fingers crossed.

Unfortunately, they’re scrap unless you know a guy who is good with boards. I’ve got one sat in a box somewhere.

 

[ronan]

This morning I paid a visit to my local scrap yard for the first time in about two weeks and whilst there I spotted this Fronius Transpocket 1500 in a skip.

View attachment 241215

I have no idea if it's working or not yet, but I only swapped a few lead acid batteries for it in the hope that if it does need a bit of work to get it going it can be done reasonably cheaply.

Fingers crossed.

You might get lucky. Kilkenny welding supplies used to be the stockists and agents for Fronius here.

 

[angellonewolf]

i just fixed a thermal arc inverter turned out it had been droped ans snaped a bit of the pcb board was not a 20 min fix but was fixable worth cheaking around the pcb board see if there are any cracks on the board

 

[Agroshield]

Fingers crossed.

Even if it's scrap, the case would make a cool lunch box or tool box or rod storage or PPE storage.

 

[arther dailey]

This morning I paid a visit to my local scrap yard for the first time in about two weeks and whilst there I spotted this Fronius Transpocket 1500 in a skip.

View attachment 241215

I have no idea if it's working or not yet, but I only swapped a few lead acid batteries for it in the hope that if it does need a bit of work to get it going it can be done reasonably cheaply.

Fingers crossed.

Can I have some of your luck ? last time all I got fwas a puncture in the van

 

[Country Joe]

A pair of T-slotted cast iron blocks.
Cleaned up well.



All the way from Pershore.

All the Best,
CJ

 

[EddyP]

First car boot since lock down began, not a bad haul, pack of 1.6 316 rods and some bronze rods too. Couple of rolls of Emery, some decent clear coat, a box of stainless M5 bolts and a schrader air line fitting.

 

[Maker]

New bit holder and a pack of bits, proper impact rated ones, with a bit of luck they'll last a little longer than the nasty old ones I've been using. For what they cost, they wanna last a lot longer!

They feel like quality at least, the holder has a death grip on the bits.

 

[Shox Dr]

Fitted the scope to the monopod today. Its very nice

 

[Am333rcr]

Hi

Ok strictly not acquired £125 but I thought 3 new I beams 200 x 135 × 3m. Was pretty good and also 10mins away from my house. Start of my new shed

 

[vw-al]

Picked this up today, non runner project, to go with my power barrow, towed it round the back with the power barrow, I will be using these for the upcoming house extension.

 

[EddyP]

Got this nice pair of drawers from my local scrap man the other day too, perfect for the lathe tools.