Today I acquired...........

[weldingnovice]

Mate spied it in the heap of 5hite at the skip yard when squaring the bill for our work skips.
Asked the owner what was going on with it and he told him to take it before it was landfill.

Looked as though the lead had been chewed through with a rough saw, robbed a cable from a spare 9" rip saw and happy days.
No hose with it but looks as though hose from my mafell might fit.
Pics don't really do it justice as very clean inside and motor runs sweet.

 

[Pigeon_Droppings2]

Paid 40 quid for these 2,clarke definitely works, SIP is unknown but do they ever work right?

Stick that migmate in the nearest skip....I hated mine with a passion in the end.

Eventually I stuck it on eBay and some joker came along and beat me down by £20 on the auction ending price....I was still well happy to see the back of it!

Theres plenty of mods out there for the migrate....maybe worth a try. Reckon it would be OK for 1.5mm stuff....mine never worked on thinner stuff.

 

[bigegg]

The sip migmate is the reason i *still* dont trust, like, or "do" mig welding.

 

[owas]

Stick that migmate in the nearest skip....I hated mine with a passion in the end.

Eventually I stuck it on eBay and some joker came along and beat me down by £20 on the auction ending price....I was still well happy to see the back of it!

Theres plenty of mods out there for the migrate....maybe worth a try. Reckon it would be OK for 1.5mm stuff....mine never worked on thinner stuff.

I only wanted the clarke, it came free

 

[Jay1st]

Bought this little one on the forum :

 

[slim_boy_fat]

Drove past the end of @slim_boy_fat 's road but didn't think you'd appreciate me calling in at 3 o'clock , (will try and call in one my way home next Friday/Saturday if that's okay?).

Definitely OK, just let me know which day and roughly time - a brew, chat & maybe bacon roll(s) to help you survive the drive back. Friday I have a surgery visit mid morning but that shouldn't take too long. Other than that, either day/time is fine. I'll PM you my phone numbers for convenience.

Dopey here had you heading home today and nearly posted you as MIA, at least I know that nothing bad has happened to you across on the 'Wild' West. My light would have been on when you passed this a.m., but you're right...you might have got slightly less of a welcome compared to at the end of the week.... I'd not have shut the door in your face though!

And another "Yes" for the diving pics btw. Enjoy the break!!

 

[jimbo84]

Don't know what these would have cost new but £25 quid delivered. Old tech now but bought to run a bit of diagnostic software.

 

[Shox Dr]

Don't know what these would have cost new but £25 quid delivered. Old tech now but bought to run a bit of diagnostic software.

View attachment 247597

700quid up. Mine in 2004 was £2300

 

[Kayos]

Don't know what these would have cost new but £25 quid delivered. Old tech now but bought to run a bit of diagnostic software.

View attachment 247597

I still have an old IBM thinkpad somewhere, refuses to die but its usefulness is limited, the newer Lenovo thinkpad is good but you can tell the difference to the older ones

 

[Shox Dr]

I still have an old IBM thinkpad somewhere, refuses to die but its usefulness is limited, the newer Lenovo thinkpad is good but you can tell the difference to the older ones

I’ve got 2 (1 of each) havent noticed a difference, must be a cost issue in later models as Levovo made them for IBM, before the rebrand.

 

[Pete.]

Had a nice score at the boot fair this morning. Two Henley Solon soldering irons - 55w and 60w, three wesco oil cans, three small hammers, a very sharp half-round file and a small hose clamp. Only 14 quid for the lot.

 

[jimbo84]

700quid up. Mine in 2004 was £2300

That's a fair bit of depreciation then!

 

[Kayos]

I’ve got 2 (1 of each) havent noticed a difference, must be a cost issue in later models as Levovo made them for IBM, before the rebrand.

Its mostly the keyboard if im honest, I think its an early illuminated one, my 2020 Thinkpad is great but that cost me a kidney

 

[Arc Tourist]

....................off into the big blue on Monday, and if I get some decent photos I'll do a dive thread, if anyone is interested??

 

[Arc Tourist]

Picked up glue gun and some saw blades at Aldi. Blades came with a silly flip-top plastic tube that doesn't close, and a warning that that you have to be 18 years of age to purchase these relatively dull blades from China. Thinking about it now, the quality of these Ferrex brand items wasn't worth a photo, but hey.
.

 

[zx9]

Don't know what these would have cost new but £25 quid delivered. Old tech now but bought to run a bit of diagnostic software.

View attachment 247597

Couple of weeks ago I resurrected an IBM Evo 600, cost me 1/2 of £1.99 for two tagged lithium cells one of which is now the Evo's Bios battery. I bought it about ten years (?) ago as a test machine to keep in the van, it was pensioned off five (?) years ago due to the lack of HDMI output. The question marks are because I really can not remember how long I have had it and forgotten that I still had it until #2 son 'Daaaad have we anything I can do some word processing on?' He was going away for a few days and obviously could not take his desk top machine with him and turned down the loan of my Mac Book for reasons unspecified, odd because the MBP is nothing special and only gets used for video editing and has a 4k output again for on site testing.

 

[eLuSiVeMiTe]

A tidy garage.
Once the lathes are gone I'll self level the floors whitewash the walls and plasterboard the ceiling. Make it a useful space again

 

[Pete.]

Look what I found in the bottom of one of my oil cans:

Duckhams oil! Haven't seen (or smelled) that in more than 30 years. I'd like to get a full can of it so I can use it as workshop air freshener

 

[Kayos]

Bit more fiddling and I've got Toque Pro running, means I can see what my egr valve is doing. Considering I have something to keep it closed it shouldn't be doing that

 

[Arc Tourist]

...............…………………………………… Duckhams oil! Haven't seen (or smelled) that in more than 30 years. I'd like to get a full can of it so I can use it as workshop air freshener

Not familiar with it. Is it like Channel No.5 for us gearheads ?