Today I acquired...........

[Lewis_RX8]

10 imperial mics and 6 metric ones , mainly starret and Moore and Wright Sheffield starret ones are Jedburgh

Quite a few duplicates in up to 50mm and 3" so let me know if you want a mic lol

A few missing screws unfortnaley however have screws that fit them just not enough so will be ordered up or made on lathe

Some real gems in there this brand spankin old sheffield Moore and Wright dont even think the box has been opened long since factory still orginal sticker not sure if date 0058 means 1958 seems a while ago

Starret Jedburgh ones really nice and lovely box attention to detail and quality a lot nicer than my import stuff. Not sure why some vandal has spray painted most of the mics silver ! , Easier identification who they belong to I suppose

Really like this aswell , Starrett jedbrugh 0 - 150 mm depth mic and says on it in stamped tape inspection department so not been abused by some RAF fitters , Real good nice no rusting or damage

 

[DanZac]

Since my Delphi clone isn't that much use due to now being several years out of date, I figured I should probably buy something that actually works on newer vehicles.
Not used it yet, as I need to find something to try it on (doesn't list Transit Customs, or 2.0 ecoblue engines), but I've updated it, and I'll try and find a test vehicle tomorrow.


View attachment 319480I've

Let us know how you get on with it. I've been looking at one of these for a while and not gone for it as there's some pretty mixed reviews out there.

Although I suspect that a lot of those reviews are from people who either don't know how to use it or expect it to magically fix their problem for them. ("I bought one of these to clear the light on my dash and all it did was tell me what the fault code was, it didn't fix it at all, absolute rubbish" Mr P Enis) Etc.

A bit of positive first hand experience will probably tip me over the edge though.

 

[Edward Teach]

I prefer to drive older cars, this week I’m using one while I’m helping a mate put up a car port.

A very nice elderly lady looked at me working when she was walking to the shops. On the way back she asked if I’d like some old tools that had been cluttering up her garage for many years.
A Bradbury jack, sturdy axle stands and a canvas bag of mixed spanner’s will all be put to good use !

Karma likes me, for the past month I’ve been touring Wales area and doing a few odd jobs when I’ve been visiting friends.
Next question - what do I need to know about Bradbury jacks (I already know it’s a very nice piece of kit !)
I’ll be getting her a small thank-you next time I’m at the shops.

View attachment 318895

I like to two Bradburys I have had for the last 25 years,
Though they could do with a re-seal now.

 

[Edward Teach]

View attachment 319296
New helmet

A 938H !

 

[northwest]

Unfortunately I was too knackered to play with it today. I'm coughing like a consumptive chain smoking coal miner and my joints are aching, shivers etc. Two lateral flow tests a few days apart are negative but going for a PCR in the morning.

If the PCR test shows negative, you have this "super cold" which if you really look at the science, it is a derivative of Covid? Turns out all flu and cold like diseases are a form of Covid, Covid number 19 being the one we have been running away from lately.
I know this because I had plenty of time to research this after one of these "flu like symptoms" types knocked me on my ass for a good long while and it has taken me about six weeks to get my act together. Lateral flow tests were negative and so were the PCR tests, still completely floored me.

EDIT: Just to be clear, I do not not go to work, I work in my workshop if I am full of cold, I am always up and about (or trying to be) even when seriously hurt. This stopped me in my tracks. Even the missus bought me a bar of chocolate "to cheer me up" so I must have been bad.

 

[pedrobedro]

Next question - what do I need to know about Bradbury jacks (I already know it’s a very nice piece of kit !)

If it works just use it. I've got a quick lift Jackette one they were scrapping from the bike shop. Seal kits are available but expensive. It leaks a bit when on the level and closed but I stand it on end problem solved and once raised it doesn't leak.

If the PCR test shows negative, you have this "super cold"

I've just about got rid of the cold after a fortnight of coughing and wheezing. Lemsip shares must be at an all time high.

 

[dobbslc]

Lemsip shares must be at an all time high.

Is Lemsip made in China then?

 

[pedrobedro]

Is Lemsip made in China then?

They make the cheaper Remsip alternative.

 

[dobbslc]

That made me laugh then cough...

 

[Kram]

Another carbide bar, should be more suited than the SCLPL and I have some decent inserts for it. £55 for this one. There are cheaper but decided this will be best. Id have prefered the smaller 0702 insert size though.

 

[winchman]

. While we were away over the weekend I came across an old Stenor vulcanizer frame; not something I need, but I recall one of the member's here is considering to attempt converting one into a mini english wheel, so I might take a punt at making one also; like I need more projects.

View attachment 319378 View attachment 319379 View attachment 319380

That was me its still untouched but much of the other stuff is sorted so its nearer the top of the list

 

[Arc Tourist]

That was me its still untouched but much of the other stuff is sorted so its nearer the top of the list

Ok, will have to find your previous post. I've only had a couple cursory thoughts on how to approach modifying it. The lower arm should be no problem to install a saddle, but the upper wheel will need to have minimal travel from under the upper arm to keep the small diameter screw from bending. Will have to have a think on wheel sizes. I noticed some sets on ebay can be had quite cheaply considering the time and material cost involved to make them.

 

[The_Yellow_Ardvark]

Tis was a good day.
I found some stuff, I was given some stuff and I gave stuff away.

Today, in Basingstoke, I found this. I saw it a few weeks ago and left it in case it was in use or the owner came back. Today I asked security and they said I could have it, as it was there for a long time.




It rattled and was heavy (ish)



The ratchet was seized, but a bit of oil had it loose.
All but one socket is Halfords. The odd one is the 8mm.
I am guessing there should be a set of Cross/pozzi head bits in there.



In a second hand shop I found a few bits.
Thread gauge, almost complete achimeadies drill, set of adjustable.
Unopened box of 13amp fuses.




Hard plastic and rubber mallet.

That lot £5

But the bargine was this trio.



£5.
A blow torch with a odd handle and a NSN number which is not a UK number. Plus 2 brand new Tilley lamp vaporisers.


I was given this item, I knew what it was, from experience and it's weight.



There was something about this box what I like.

It is in need of a lot of TLC




What is in the box?

Another one..............................

 

[The_Yellow_Ardvark]

Oh yes.

This made it way to me.
Some memories from a different life.




Yes it is one of the latter versions. Not the classic "D Cell" version.

 

[DAPPH]

Tis was a good day.
I found some stuff, I was given some stuff and I gave stuff away.

Today, in Basingstoke, I found this. I saw it a few weeks ago and left it in case it was in use or the owner came back. Today I asked security and they said I could have it, as it was there for a long time.


View attachment 319574

It rattled and was heavy (ish)

View attachment 319575

The ratchet was seized, but a bit of oil had it loose.
All but one socket is Halfords. The odd one is the 8mm.
I am guessing there should be a set of Cross/pozzi head bits in there.

View attachment 319576

In a second hand shop I found a few bits.
Thread gauge, almost complete achimeadies drill, set of adjustable.
Unopened box of 13amp fuses.


View attachment 319577

Hard plastic and rubber mallet.

That lot £5

But the bargine was this trio.

View attachment 319578

£5.
A blow torch with a odd handle and a NSN number which is not a UK number. Plus 2 brand new Tilley lamp vaporisers.


I was given this item, I knew what it was, from experience and it's weight.

View attachment 319579

There was something about this box what I like.

It is in need of a lot of TLC

View attachment 319580


What is in the box?

Another one..............................

View attachment 319582

My first sewing machine was a Singer similar to that one. I used it initially to make fishing rod bags for friends and friends of friends ..cost me 2/6 at a jumble sale in 1963

 

[roblane65]

Since my Delphi clone isn't that much use due to now being several years out of date, I figured I should probably buy something that actually works on newer vehicles.
Not used it yet, as I need to find something to try it on (doesn't list Transit Customs, or 2.0 ecoblue engines), but I've updated it, and I'll try and find a test vehicle tomorrow.


View attachment 319480I've

I've got the icarsoft which I use on the range rover It will actually do quite a lot and relatively cheap .

 

[winchman]

Ok, will have to find your previous post. I've only had a couple cursory thoughts on how to approach modifying it. The lower arm should be no problem to install a saddle, but the upper wheel will need to have minimal travel from under the upper arm to keep the small diameter screw from bending. Will have to have a think on wheel sizes. I noticed some sets on ebay can be had quite cheaply considering the time and material cost involved to make them.

Winchboy has a full set he bought at an Autojumble in the box but no frame, so lets hope I can adapt mine to use his wheels.

 

[Kram]

Since my Delphi clone isn't that much use due to now being several years out of date, I figured I should probably buy something that actually works on newer vehicles.
Not used it yet, as I need to find something to try it on (doesn't list Transit Customs, or 2.0 ecoblue engines), but I've updated it, and I'll try and find a test vehicle tomorrow.


View attachment 319480I've

Would this be any good for diagnosing a 2008 Kia Rio?
Or, is there anything similar that would be?

 

[James1979]

I've got the icarsoft which I use on the range rover It will actually do quite a lot and relatively cheap .
Have you ever used it on an L200 please? Specifically a 2012 one?

 

[Brad93]

A pressbrake, from pressbrake