Today I acquired...........

[The Artilleryman]

Spotted a garage/yard sale 5 mins. up the road from me - on local face ache page - came back with these

the loppers are extending handle ones, better than my standard ones, and a Ryobi strimmer, I'll find out if it's any good tomorrow, don't know much about petrol strimmer's, so just hope this is a reasonable make/model.

 

[25.4_mechanic]

Friday I acquired a little light in my life.

Wired LED light, to be more precise - I wanted something I could turn on and off along with the machine light.

Expectations weren't high, which is better with this one supplier - they got me around with the bonus items.

The manufacturer is supposedly located in Poland, which I know and often appreciate with mechanical products, with electronic items they have not yet come to my attention.

A lot of light comes out in any case ...

Mains-connected LED lamps - especially the cheap ones, but not only those - are often made pulsating, which is not too bad at the full mains frequency of 50Hz, our eyes are too sluggish for that, but if they use only every second half-wave of the mains voltage, some people can perceive that.

The fact that I came here while photographing exactly into a switching process can be complete coincidence or an indication of flickering ....

The second lamp aims with its presentation and the price probably at a somewhat higher segment, but comes from the same "manufacturer", conveys the same plastic feel and also comes up with some placement and hanging gimmicks.

Talked me into trying this supplier again with these flashlights, one for each LED light, looked good on offer:

They make a good impression, good size, good weight, O-ring seal on the battery compartment and a pretty strong magnet in the end cap ...

The red strobe light will hopefully not get much use time with me ...

As a surprise give-away then another miracle oil, which might also be just another iteration of the MoS2 creep oil theme - this one with a scent that reminds me of the smell of freshly cut celery.

Must just be good, with that name and "plus" and "professional" and "multi" and "extreme" and - although brand new on the market already multiple test wins (in presumably self-created tests) - the most interesting feature for me on the back: caution, highly flammable!

Happy Sunday everyone,

Carsten

--

 

[Kayos]

Friday I acquired a little light in my life.

Wired LED light, to be more precise - I wanted something I could turn on and off along with the machine light.

Expectations weren't high, which is better with this one supplier - they got me around with the bonus items.

View attachment 330417

The manufacturer is supposedly located in Poland, which I know and often appreciate with mechanical products, with electronic items they have not yet come to my attention.

View attachment 330418

A lot of light comes out in any case ...

Mains-connected LED lamps - especially the cheap ones, but not only those - are often made pulsating, which is not too bad at the full mains frequency of 50Hz, our eyes are too sluggish for that, but if they use only every second half-wave of the mains voltage, some people can perceive that.

The fact that I came here while photographing exactly into a switching process can be complete coincidence or an indication of flickering ....

View attachment 330421


The second lamp aims with its presentation and the price probably at a somewhat higher segment, but comes from the same "manufacturer", conveys the same plastic feel and also comes up with some placement and hanging gimmicks.

View attachment 330422

View attachment 330423


Talked me into trying this supplier again with these flashlights, one for each LED light, looked good on offer:

View attachment 330431

They make a good impression, good size, good weight, O-ring seal on the battery compartment and a pretty strong magnet in the end cap ...

View attachment 330432

The red strobe light will hopefully not get much use time with me ...

View attachment 330429


As a surprise give-away then another miracle oil, which might also be just another iteration of the MoS2 creep oil theme - this one with a scent that reminds me of the smell of freshly cut celery.

View attachment 330433

Must just be good, with that name and "plus" and "professional" and "multi" and "extreme" and - although brand new on the market already multiple test wins (in presumably self-created tests) - the most interesting feature for me on the back: caution, highly flammable!

Happy Sunday everyone,

Carsten

--

Before recent rule changes, when people asked me to recommend drain cleaner I told them "the one with the most warning symbols"

 

[slim_boy_fat]

then remembered some old knife magnets ejected from the kitchen when we refurbished it.

Won't the proximity of the magnets affect the screen (LCD?) over time?

 

[slim_boy_fat]

so just hope this is a reasonable make/model.

It's a Ryobi, not the best but by no means the worst. Designed, I think, for the home user and not Pro use. It'll cut grass.....

 

[Farside]

Won't the proximity of the magnets affect the screen (LCD?) over time?

Nothing to affect, there.

Can magnets damage LCD screens?

My guitar teacher once told me that leaving a magnet near a LCD screen will affect it. I was skeptical because I guess that he believes that because magnets can affect CRT screens. Here are some

skeptics.stackexchange.com

 

[magnet]

Trailer load of free firewood

 

[slim_boy_fat]

Nothing to affect, there.

Can magnets damage LCD screens?

My guitar teacher once told me that leaving a magnet near a LCD screen will affect it. I was skeptical because I guess that he believes that because magnets can affect CRT screens. Here are some

skeptics.stackexchange.com

Thanks, 'twas just a thought..... (I get a lot of them )

 

[roblane65]

That's why it's called ash wood ..

Have a good check of any you want to bring indoors and treat any wood worm or other problems whilst it's out in the shed .

What comes in the house goes on the fire It's all de nailed now and not a pick of worm in it

 

[DAPPH]

Not with my legs!!!

Or your face apparently .

 

[DAPPH]

Won't the proximity of the magnets affect the screen (LCD?) over time?

Try it & see , report back in six months time ..be a leader in vital research rather than take somebodies word who you don't know for it .

 

[slim_boy_fat]

Try it & see , report back in six months time ..be a leader in vital research rather than take somebodies word who you don't know for it .

I'll pass, but which "somebody" do you mean?

 

[bricol]

Mains-connected LED lamps - especially the cheap ones, but not only those - are often made pulsating, which is not too bad at the full mains frequency of 50Hz, our eyes are too sluggish for that, but if they use only every second half-wave of the mains voltage, some people can perceive that.

The fact that I came here while photographing exactly into a switching process can be complete coincidence or an indication of flickering ....

That sounds something to be aware of around rotating equipment - used to be a thing with fluorescents, but not heard it for LEDs before. Only seen it once by accident, but certainly made use of the stropboscopic effect with high speed machinery to "freeze" the action before the days of cheap (30 grand for our first one, refurbished!) high speed cameras.

 

[Farside]

That sounds something to be aware of around rotating equipment - used to be a thing with fluorescents, but not heard it for LEDs before. Only seen it once by accident, but certainly made use of the stropboscopic effect with high speed machinery to "freeze" the action before the days of cheap (30 grand for our first one, refurbished!) high speed cameras.

One or two of the earlier LED headlamps I have flicker at a rate that would be dangerous near a lathe at the right speed.
I've noticed the ones I've bought in the past couple of years aren't guilty of that, but it pays to check, as they're all / or mostly driven by a pulsing circuit.

 

[DAPPH]

That sounds something to be aware of around rotating equipment - used to be a thing with fluorescents, but not heard it for LEDs before. Only seen it once by accident, but certainly made use of the stropboscopic effect with high speed machinery to "freeze" the action before the days of cheap (30 grand for our first one, refurbished!) high speed cameras.

I can see it on my lathe under certain older LED lighting , usually in a fifty cycle harmonic when I can hear the lathes running tune changes when the property's incoming mains power momentarily waxes & wanes for ten to fifteen volts or more in a regular pattern over ten to fifteen seconds or so .

The very latest LED floods I've got do not produce a phase related flicker that I can detect but before advancing the cutting tool or doing anything to the chuck or tool post I always check the back gear condition to see what is happening , is it stopped or moving the drive belt?

 

[dobbslc]

A call from my wife to come home now as I have a positive covid test
I feel dirty!

 

[123hotchef]

A bargain gate for £5. I was going to cut it down. But it does the job just fine as it is.

 

[slim_boy_fat]

A call from my wife to come home now as I have a positive covid test
I feel dirty!

Sorry to read this, but do you feel ill? Many don't, apparently.

 

[dobbslc]

I feel a bit crappy with a cough and the shivers but was out yesterday cutting and splitting logs, I thought it was a cold!

 

[Arc Tourist]

I feel a bit crappy with a cough and the shivers but was out yesterday cutting and splitting logs, I thought it was a cold!

Feed a cold, starve a fever, stay warm and drink plenty of fluids. Lager and Strongbow comes to mind.