Today I acquired...........

[roofman]

Typical modern vehicle, built to fail

I have a Renault Trafic 05 sitting at 180,000 and every problem listed here so far has not happened.. I have a fully rebuilt 1.9 engine and turbo which i built last year and truth be known i don't think i will need it any time soon..Problems arise with "built to budget" vans from them going into fleet service and getting hammered into submission, i change the oils and filter every 3000 and swap out anything that shows signs of being worn and it pays dividends. My mate has a Vivaro with 225,000 on it and still going strong.

 

[roofman]

my spare 1.9 motor ready for D.day

 

[Onthespotwelding]

I have a Renault Trafic 05 sitting at 180,000 and every problem listed here so far has not happened.. I have a fully rebuilt 1.9 engine and turbo which i built last year and truth be known i don't think i will need it any time soon..Problems arise with "built to budget" vans from them going into fleet service and getting hammered into submission, i change the oils and filter every 3000 and swap out anything that shows signs of being worn and it pays dividends. My mate has a Vivaro with 225,000 on it and still going strong.

You are very lucky!

I would buy a lottery ticket if I were you

 

[nickk]

Part way thru clearing MIL house,a good old Honda.she quickly outgrew that bike though!

 

[roofman]

Part way thru clearing MIL house,a good old Honda.View attachment 339692View attachment 339693

Would that mower be for sale by any chance Nick

 

[DAPPH]

...but what is it?

It's an adjustable pole using the vertical support struts off a big scrapped trampoline using a 6 to 1 pulley to hoist fencing panels out or put them back into H section concrete posts on your own or of you're a decrepit old geezer like me you can do it with your lass . Taking the rotting ones out was easy I used a 9 inch rough timber sabre saw to cut them in half in situ..

 

[Migmac]

Today I found this in the dry mud where they’d been working on a machine. It usually six inches of mud in these areas
View attachment 339030

Went back today, had some time to kill. Went prepared!
The haul






This helped a lot

 

[DAPPH]

Seconded. Use them at work now as well as for myself Really decent quality, especially considering they are cheap.
I actually had a tour around their blade making/sharpening shop the other week! Not exciting, but nice to see their operation.

I think the skill in cutting the saw blade strip to the right length so you get the fused point between the root of a pair of teeth and still have the run of alternate off set teeth is something that gets over looked by quite a few blade makers . I've sent quite a few specially made up 1/2" bi metal band saw blades for my 17 yr old two speed Rexon hobby saw back still in the poly bags they arrived in as I used a magnifying glass to enlarge the joint and like some of you say two teeth are on the same set or you get a full tooth and a half tooth either as offsets in pair or alternates.
What did annoy me was that they took the blades back and charged me £ 7.80 P&P for the new blades ( marked them with a UV security pen ) & didn't send a apology .

The replacement blades were perfect & so should they be as they charged me £ 58 for a pair of them .

 

[slim_boy_fat]

These vans are notorious for injectors seizing in the head!

Blown turbos and Gearbox problems are all to common.

And whoever thought putting the brake bleed nipples in the middle of the brake caliper needs shooting!

Aye go on, cheer the lad up.

 

[slim_boy_fat]

Got myself a proper score today, possibly the best skip find I will ever have!.

One old and dirty (but absolutely perfect otherwise) Snap-on top box
View attachment 339643

One mid box? that fits under the top box
View attachment 339638

Best part is it is full of stuff mostly sockets and spanners a lot of it is snap-on and the rest is a hodge podge of britool, kamasa and draper.
View attachment 339639

There is one particularly strange socket in there, big (didn't have time to measure but probably around 2") that reduces down a 1/2" drive. For the size of it I would have expected at least 3/4"??
View attachment 339640View attachment 339641

When I parked up at work after lunch I also noticed a rather satisfying mileage
View attachment 339642

Hope you bought a Lottery ticket!

 

[DAPPH]

Hope you bought a Lottery ticket!

Getting a score like that he doesn't deserve a lottery ticket , even if it looses .

 

[500e]

Same here @Brad93 @DAPPH
Sent 4 back, teeth at joint damage
Won't buy from them again

 

[Cuthy246]

Hope you bought a Lottery ticket!

Getting a score like that he doesn't deserve a lottery ticket , even if it looses .

Didn't bother getting one. Knew I had used up my luck for the next week/month

 

[Craig-SM]

A nice Record No23 vice. Needs a good strip and clean but its generally had little use.

 

[Woody.v8]

Membership of a working men's club. Its unusual in being in the middle of nowhere and run completely by volunteers. It only sells decent ale and is next to a river, ideal as a walking destination over the moors.

From home it's about 8 miles, or 9 going the extra scenic route, so a 3 hour walk, so you burn off the calories before you put them back on, all part of the beer diet

Is that 8 or 9 miles in a straight line, or have you taken zig stagger into account?

 

[Moose McAlpine]

So as there's no known cure for covid, i took treatment into my own hands and undertook some retail therapy.

(Hazet ¾" deep impact E20 + E24 torx, ¾" T80 and T90 torx bits and a ⅜" deep E12 torx.)



Pleased to report it has worked. I feel much better.

 

[zeppelin builder]

a set of davida vacuum gauges bought in 2006 for £90 never been out the box
with adapters and damping clamps

 

[JEZGUZ]

I decided to pop into the local charity shop as I was passing and had a look at the books. I found a couple which interested me, the "Manual of Seamanship" Vol 1, published by the Admiralty in 1951. All thing relating to ships and boats and the Navy. The second might come in handy if I ever get hold of some Naval artillery pieces "The Gunnery Pocket Book" also published by the Admiralty but in 1945. They must have had bigger pockets back in 1945, it measures 245mm x 160mm. All you need to know about lobbing shells at other ships and the relevant terminology. Some great illustrations in foldout pages in the rear of the book. I shall attempt to take some pics if there's any interest.

 

[DAPPH]

So as there's no known cure for covid, i took treatment into my own hands and undertook some retail therapy.

(Hazet ¾" deep impact E20 + E24 torx, ¾" T80 and T90 torx bits and a ⅜" deep E12 torx.)

View attachment 339750

Pleased to report it has worked. I feel much better.

My mate won a set of Saltus OJ's , ROJ and DE metric ring spanners 4,5 ..6,7.... ,8,9...,10 ,11...12,13.....14 ....15 , 16....17 , 18.....19 ,20 ..... 21, 22 ...... 23, 24,.... 25 , 27 & 28 , 29 in a Christmas raffle in 1970,
I won a 36inch chest Wrangler sweat shirt ( They were quality tops in those days.) .

As I was a 44 inch chest & he was barely a 38 inch chest ... he'd no use for spanners being a clerk so he asked me if I'd swap my prize with his. It was hard not to rip his extended arm off .

I was doing a long over due mancupboard tidy yesterday and today .. In all that time I have only Killed the 13mm ROJ when I snapped the ring end whilst working is a scrap yard in Germany trying to undo one of the super glued in bolts on a smashed up BMW . The 10 mm ROJ was cut in half to allow me to remove the difficult to get at magneto BA mounting bolts on a Mighty Antar's Meteorite 205 RR petrol engine . ( still got both parts)
The 10 mm ROJ was replaced with a Britool 10 mm in 1974 .
The owner of the scrap yard brought me a brand new Hazet 13 mm ROJ
The Saltus spanners now have had a bit of surface discoloration but are still in fantastic condition , the Hazet spanner is almost as good ...not bad for 52 years of almost every day hard abuse free engineering

 

[roofman]

A nice Record No23 vice. Needs a good strip and clean but its generally had little use.

View attachment 339723View attachment 339724
View attachment 339725

You do know that curled up lip at the back is for holding your fag while using the hacksaw..they thought of everything