Today I acquired...........

[droopsnoot]

Also a cheapy mobile phone holder that im going to fit on the ride on mower!

I bought pretty much exactly the same phone holder from Food Warehouse a few weeks ago for £1.99. I thought I'd give it a go in one of the classics and if it was any good, get a couple more so I don't have to move them from one car to another. Of course, they don't stock them any more, only the one with built-in wireless charging (which my phone doesn't do) for £14.99.

 

[Parm]

Food is gone.

Now the contents of the box

This is how I pulled them out. I have not investigated them yet. Thats is tonights job.

View attachment 355185

This may go over seas.

View attachment 355187


Upholsters Hammer.
@Parm Not yours.



View attachment 355189

Brass drinking containers.
@Barking Mat send me some french brandy to clean them with, please.

View attachment 355191

A MOD Battery lamp.
It even has a battery.

View attachment 355192


A odd collection od interesting things.

View attachment 355193


A Mamod Burner tray.
Set of Allan keys.
RN RATS Small adjustables.
@daleyd NOt yours are they?
1950's West German Compass.
Plus a Yellow Kodac tin.

View attachment 355194

A nice lense, but stuck to the patatoe paper.

I’ve only requested an axe …

 

[The_Yellow_Ardvark]

I’ve only requested an axe …

I have offered you many. (2). Not my fault you are being like my MIL.

Plus many hammers.

 

[Parm]

I have offered you many. (2). Not my fault you are being like my MIL.

Plus many hammers.

I’m not like your hammer

 

[Barking Mat]

Recently acquired. This 1903 churchill redman lathe. Complete with a full set of huge change gears. Steady. Lineshaft and pulley. Faceplate and chucks ect.

View attachment 354666 View attachment 354667 View attachment 354668 View attachment 354669 View attachment 354670 View attachment 354671 View attachment 354672 View attachment 354673

Now don't get me wrong Spencer, we all love machinery, especially lathes etc, but how many do you own ? Are they still all under tarps with the reste of your encylopedic machinery collection, not knocking you, just curious.

Mat

 

[Melvyn Best]

Gaskets just in time for our foreign adventure.View attachment 355163

Don’t bother trying to undo the flange nuts , I split them with a sharp chisel which reduces the risk of sheared studs

 

[God mode restorations]

Now don't get me wrong Spencer, we all love machinery, especially lathes etc, but how many do you own ? Are they still all under tarps with the reste of your encylopedic machinery collection, not knocking you, just curious.

Mat

A lot lol. Some are under cover yes. I am way behind on my workshop build due to different reasons.

 

[JEZGUZ]

Those "Drinking containers " are alcohol measures, 1/6 of Gill upwards.

 

[DAPPH]

A couple of cheap 30w floods and PIR that I WILL put up before winter, lets see what they are like for just under £8 each, nice and slim though
View attachment 355186
View attachment 355188

They look exactly like the four failed early ones I've had


I altered the replacement lamps so they had at least an additional metre of cable than would normally be added to allow me to bring the cables through the outside wall in an angled up plastic tube and into my mancupboard to a switched socket & fit a 13 amp three pin plug on the cable with a few feet of cable to spare inside for future change outs .

That way when another fails it's a quick job to unplug it , cut off the cable at the light end , undo the two mounting screws and put up another cable extended light then feed the wire up the plastic tube leaving a six inch drip loop outside , so I can put the plug on inside a dry garage whilst stood safely on the floor . Much better than standing on a ladder fiddling about in the wind & rain .

 

[badabec]

Also a cheapy mobile phone holder that im going to fit on the ride on mower!
View attachment 355190

Here's mine

 

[Bravheart]

Here's mine
View attachment 355237

I like cutting grass gives me an hour away from the bl***y phone

 

[My Old Landy]

My freedom I was released late last night. I still can't walk properly and covid has taken its toll but I am glad to be home. I have a big bag of medication and a plan. That will do me.

 

[redlig]

My freedom I was released late last night. I still can't walk properly and covid has taken its toll but I am glad to be home. I have a big bag of medication and a plan. That will do me.

Brilliant news!!! Just don't try to run before you can walk. Not meant as a joke.

 

[Blobber]

I like cutting grass gives me an hour away from the bl***y phone

Grass cutting is a chore I have to do but Im trying to improve my customer service so rather than miss all the calls I can now choose who to ignore!!

 

[brewdexta]

I have two Wadkin PK pattern makers saws that I am (very) slowly restoring. The sliding table is fixed in position by this cam action handle that pulls a rod up and down. The rod is sprung in the up position.

Unfortunately lost on the other PK, you can see it where the rod has snapped off where the fulcrum pin goes through and is a bit bent.

I was going to fabricate another handle seeing I had one to use as a pattern, but one came up at a reasonable price on the bay.

Next, a propane cylinder filling kit. I'm going to fill my smaller 3.9kg cylinders I use for camping and the small plumbing blowtorch from the 16kg cylinder I use for the weed killing with a big roofing torch. I can't get refills for the small bottles from any local supplier.

Cheers
Andy

 

[nickk]

Don’t bother trying to undo the flange nuts , I split them with a sharp chisel which reduces the risk of sheared studs

They undid very easy,despite being fitted 8 years ago,I’d used copaslip with brass nuts.

 

[Rannsachair]

An 80mm dia bar of acetal to make a new centre for glass garden table with hole for sun shade:

 

[nickk]

More slippery stuff,reconditioned gearbox 9000m ago,this is the first change .
What is it about the smell of hypoid?

 

[Pigeon_Droppings2]

More slippery stuff,reconditioned gearbox 9000m ago,this is the first change

Volvo reckon their gearbox oil is good for the life of the car...always plenty of Volvos on sale with busted gearboxes!

The volvo didn't have a changeable filter...I bought a magna fine in-line filter...only works if you have an oil cooler of course.

Also stuck one on the power steering and I have to say the oil has stayed very clean (it's green so it's easy to tell)

 

[Melvyn Best]

They undid very easy,despite being fitted 8 years ago,I’d used copaslip with brass nuts.

I worked at a VW main agents back in the 70s , have often seen the results of people trying to undo factory fitted nuts , as said I always split the nuts