Today I acquired...........

[cheb]

A British Rail (Scotland) oil lantern. And the Flymo lead. And a shed vacuum cleaner.

 

[The_Yellow_Ardvark]

@cheb .
Check the colour glass is there.

We like those lanterns.

 

[cheb]

@cheb .
Check the colour glass is there.

We like those lanterns.

Clear, red and blue. All intact.

 

[The_Yellow_Ardvark]

Is the 1/4 round wick burner there?

 

[cheb]

The wick's flat, about 10mm, and winds up and down smoothly.

 

[The_Yellow_Ardvark]

@cheb
Check all parts are stamped or marked up with BR stamps.

If not, it is a Bitsa lantern. Not an issue, but means it was rebuilt, built from spares.

Look for dates as well. No dates is not an issue, but a date of pre 1935 is very good. On any part.
I know BR came in after that date. But mant lanterns were embossed with BR as they had been taken up from stores.

 

[Memmeddu]

This lump of steel and winding material with roughly 12 to 14 meters of 50mm² cable
For less than the price of the cable itself
It will see some major upgrades....
Edit picture doesn't show well the dimensions
But this thing is bigger than what it looks
Roughly
60x30x50cm + the cage

 

[cheb]

Will do

 

[6ply]

Today I acquired a bed load of box section and some solid 10mm oak boards. 2mm thick box , so more than adequate for what I have in mind for it.


View attachment 418339

Are you planning to mig weld the scrap bed box section? Stuff like that gets chucked out at work all the time (desks, etc) and I've often wondered if it could be useful. What are you making?

 

[Pete.]

View attachment 418363
This lump of steel and winding material with roughly 12 to 14 meters of 50mm² cable
For less than the price of the cable itself
It will see some major upgrades....

My dad bought one of those brand new in the '80's, and I later inherited it. I can't remember what became of it but it was reliable enough.

 

[Kram]

Cut off the stump for neighbour which is a nice height for splitting on or perhaps as a table base. Going to char it and seal with wax and see how long it survives.
The dark triangle of rot, smelled aweful when cutting, like burning vomit !

Plenty more logs and I may take some more to carve or, split and burn.

I see amazon sellers are selling 30L boxes of birch wood for £20-40 each and people are buying them

 

[Memmeddu]

My dad bought one of those brand new in the '80's, and I later inherited it. I can't remember what became of it but it was reliable enough.

A friend of mine who unfortunately passed away too soon
Had 3 CEA welders
He ran his business around those 3 welders.
I unfortunately didn't have money at the time to buy something from his shop ,so I bought a similar one of those.
It's more for this reason than for necessity but I'll of course use it after a little restomod project

 

[nickk]

Beyond my capabilities of bending,helixing,planned on meeting my bending man by Worcester south jn of m5 at 8.30 yesterday morning,got there 10 to 8,waited until 9.30,no sign head for home,he phones to say he’ll be there at 12.30,didn’t you get my messages last night! he eventually arrived at 3.40 ,m5 closed,accident,then on the way home a front tyre exploded,an expensive time wasting day,but I did find a ratchet winder on the verge,and rememberino people probably hurt took the sting off it.

 

[The_Yellow_Ardvark]

Free bike.
I had to walk it home from the pub.

We had to walk it home as we were balancing this on it.

This is why I took the lot.

 

[The_Yellow_Ardvark]

I also got sent this.

I was given it for spares.

 

[Memmeddu]

Went to my local decathlon yesterday and bought new egies for the incoming squid fishing season

 

[Pete.]

Found a tin full of reamers at the boot fair. Normally I would pass these over as they are invariably blunt or dinged but this one caught my eye because I spotted ome taper pin reamers in there.

Paid £10 for the whole tin full and found 22 of those taper reamers plus a taper drill for pre-drilling the holes too!

 

[MattF]

Free bike.
I had to walk it home from the pub.

View attachment 418395


View attachment 418396

We had to walk it home as we were balancing this on it.


View attachment 418397



This is why I took the lot.


View attachment 418398

What type is the clamp on vice?

 

[The_Yellow_Ardvark]

What type is the clamp on vice?

It is bench style clamp.

 

[MattF]

It is bench style clamp.

You can be an annoying so & so on occasion, you know. You know what I mean. It looks York like in the visible front end styling.