Today I acquired...........

[jordhandson]

some things that are to with threads, one of my old boy customers popped them in passing, he has had them in the barn for years, dont know yet if there any use will give them a soak in red for a day or so, only cost me a bit of time chatting a coffee and a couple chocolate digestives. dont you just love life.

View attachment 171623 View attachment 171624 View attachment 171625

Update on these chasers all looking clean and ready for some use lol now boxed up on the shelf

 

[jordhandson]

pick up an original Colchester Lathe book will come in real handy

 

[indy4x]

Oooh, links?

Dave H. (the other one)

I picked up the links from @doubleboost YouTube reviews

Parting Tool

https://goo.gl/Zx73eX
https://goo.gl/FD5TBU
https://goo.gl/14wtkZ

One thing to note, the parting blade is 32mm (from memory) and the parting holder needs a 20mm or 3/4" toolholder. I'm not too happy with the amount of overhang when you fit the parting tool holder into the QC holder so am planning on making my own QC parting tool holder that goes straight on the toolpost

ER32 Collet Blocks

https://goo.gl/GKz18B
https://goo.gl/BjGxET

Toolholders were the BXA type, TBH they aren't much more expensive from ARC Eurotrade, bought 2 off them and 3 off Banggood

 

[slim_boy_fat]

I’ve got one the same, inherited it from my father. It’s in the shed with a barrel of homemade on it at the moment.

I'm sure he'd have approved.

 

[Cobbler]

I'm sure he'd have approved.

I doubt it Slim, he never approved of anything else I got up to

 

[slim_boy_fat]

I doubt it Slim, he never approved of anything else I got up to

Oh, sorry to read that - I was pretty much in the same boat, but....hey, ho.

 

[Cobbler]

I doubt it Slim, he never approved of anything else I got up to

Oh, sorry to read that - I was pretty much in the same boat, but....hey, ho.

I would guess in my case & possibly yours as well, they may well have had good grounds to disapprove

 

[slim_boy_fat]

I would guess in my case & possibly yours as well, they may well have had good grounds to disapprove

Not guilty, M'Lud - he just thought no-one could ever do anything right. I wasn't particularly singled out.

 

[Johnnybravo]

New 275bar pressure washer pump turned up today. Just waiting on an unloader valve and a reduction gearbox and I can continue with my elbow manufacture

 

[brightspark]

View attachment 172616 New 275bar pressure washer pump turned up today. Just waiting on an unloader valve and a reduction gearbox and I can continue with my elbow manufacture

what price was the pump

 

[DAPPH]

Today I was again a few hundred miles from home. 3 1/2 drive to a site to explain to a customer that it is correct for the Emergency lights to come on when there is a power cut. Plus that some are illuminated all the time and why.
I also did not:
Use of more than 2 sibyls.
Long words.
Or punch him.

So I diverted on my way home.

View attachment 171706

A unknown make of Abrafile saw. There is a Patient number, I will try and find more details.


View attachment 171708

Old fashioned Road Work like, complete with a new-ish paraffin wick. I was not going to pay the asking price with a "As original" wick holder, for one simple reason. It did not work.


View attachment 171709

In Flame.


I have bean after one of theses for a while. But after Dr. Who and the episode "The Beast Below" the price went through the roof and decent ones became hard to find. Then there was trend to "Up-cycle" them and putting in electric lights.

They make brilliant heaters for outside brick houses ( if the doors are in reasonable condition) In the really bad winter of 1962/3 the rats used to sit on the wood work near the lamp to get warm .

 

[DAPPH]

View attachment 172616 New 275bar pressure washer pump turned up today. Just waiting on an unloader valve and a reduction gearbox and I can continue with my elbow manufacture

You going gold diving Johnny or making a water cutter bed . 4k psi is quite something to play with .

 

[DAPPH]

Bit of history. In Bradford On Avon there was a small tool and fixings suppliers. But sadly they have closed down. Recently at a local auction house their "New Old Stock" have been turning up. I think the ex owners are selling remains of the stock off. I can only guess, but I have seen their old logo on some old auction lots.

This is what I was successful on.

View attachment 171924

I think there is about 200 to 400 items per bag.

I also uncovered this in a box of bits in a charity shop.

View attachment 171926

A mess, a puppy fit only for scrap?

The chisel is a nice bit of steel for a forging knife maker to play with

 

[The_Yellow_Ardvark]

The chisel is a nice bit of steel for a forging knife maker to play with

It is also a nice tool for MIS to cut wood with.

 

[DAPPH]

Banggood booty arrived today

I blame @doubleboost

View attachment 172107

You might need to change the clamping screws on all holders for some decent precision high tensile ones … mine were like liquorice & opened up the first time I put the Allen key in them ( yes it was the correct size )

 

[indy4x]

@DAPPH I did set them up last night, seen other posts about chinesium threaded bits but cranked them down and so far so good.

I am going to remake the clamping stud for the QC toolpost tho as not too happy with what was supplied

 

[DAPPH]

It may be sold by RS, but originally I think it was made by Antex

View attachment 172372

My Antex micro like that is 32 yr old & still gets a work out every now & then . They are rather expensive these days , most folk seem go for the £ 15 soldering station where you can adjust the tip temperature to solder melting pint + a degree or two over as modern pcb's tracks tend to lift up if much heat is applied to them.

They wreck sandwich / multiple layer circuit boards .....as I found out only a couple of weeks ago .

 

[DAPPH]

@DAPPH I did set them up last night, seen other posts about chinesium threaded bits but cranked them down and so far so good.

I am going to remake the clamping stud for the QC toolpost tho as not too happy with what was supplied

I thought of buying extra long high tensile studs for the tool holders so I could make the most use of the QCTP's block height .. changed my mind when I found them on eBay at nearly £ 9 each . Instead I purchased an RGD 100 mm ( ?) circular vice put it on some square key steel an simply clamp that in a tool holder when I want to play at trying to mill Delrin , alu & brass jobs.


Found that the tool post anchoring stud has been bodged by a P/O they used a badly fitting high tensile steel bolt which started to pull through the anchoring slot , it lifted the mating face for the QCTP on the cross slide a fraction , so it allowed a smidgeon of rotation of the QCTP when it was under pressure .. just when you don't want it ,such as when using a long boring bar .

I blued it up and ground a four inch length of an industrial hack saw blade to make a scraper , getting a decent right angle cutting edge on it using an 8 inch diamond whetstone , then set to work on the hump cross filing & scraping it flat again .

 

[DAPPH]

^^ Those pins look so incongruous - what would have been there originally? [old ones of the same, I suppose ]

I feel that it should possibly be a brass or cast iron washer either side off the wheel and a taper start parallel body mills pin rather than a split pin through the axle plus plenty of thick black grease .

Just checked using google seems very likely put ( lister engines on cast iron wheeled trolley" into Google & look in images .

 

[DAPPH]

Sunday I got this B&D work mate.

View attachment 172532

It is now free to open and close.

It is an early one, ally frame and 1" ply top.

It dates from about 1973.

https://en.wikipedia.org/wiki/Ron_Hickman

Ron Hickman was the brains behind it.

Lovely bit of kit but the alloy parts tended to break .
I have my dads work mate made in pressed steel from about 1974/5 . I turned up an aluminium vice handle knob about a couple of years ago after routing off half the old one . I've also all four new plastic leg lock "D" springs & made a slightly longer pair of new tops in 25 mm HDF .

A good Work mate table is worth it's weight in gold , I made a welded up 8 inch wide T plate in 6 mm steel to mount a 4 inch vice on , it fitt in the vice part so I could have the best of both worlds when I was SE. Now a days it fits in a slot I cut in the edge of my welding bench & can still be removed easily when I need the full bench top.