- Thread starter doubleboost
- Start date
Barking Mat
Cuddler of hedgehogs.
- Messages
- 13,146
- Location
- France, Brittany.
Barking Mat
Cuddler of hedgehogs.
- Messages
- 13,146
- Location
- France, Brittany.
seriously, i paraphrased from it above from memory, but i dont have it anymore, so dont ask for a copy
I'm not having a go at all.
Or playing devils advocate.
Just curious.
That black sleeve covering the first 40 ? Cms of exhaust pipe is like day and night to a webasto.
Webasto supply as many meters of kevlar? Sleeve protection which covers the whole length.
That silencer is attached to a plywood panel, in a fibreglass boat.
I mean what could possibly? Go wrong?
I might (probably) (very probably), will cover it in the extra Kevlar protection, left over from, webasto insulation.
But then will that invalidate the warranty?
Hopefully it will stop it setting the boat on fire.
********
All you people with Chinese ones or others?
How hot does the exhaust pipe get please.
Never been an issue covered in kevlar.
Barking Mat
Cuddler of hedgehogs.
- Messages
- 13,146
- Location
- France, Brittany.
If you put a bit of wood in close proximity, will it discolour or catch fire?
Am I paranoid???
Am I paranoid???
bigegg
Scream Not Working Because Space Make Deaf
- Messages
- 9,579
- Location
- Leeds, West Yorkshire
Same.
Although i think mine is a 20A
I have several, can't remember which one i've got connected ATM
It also runs some LED garden lights.
gaz1
Member
- Messages
- 19,390
- Location
- westyorkshire
duncans
Member
- Messages
- 747
- Location
- leicester
yeah was watching a u tube video and he ran LED light in his garage plus his diesel heater good set up it was
qwakers
Member
- Messages
- 2,205
- Location
- cornwall, united kingdom
old pc power supply.
gaz1
Member
- Messages
- 19,390
- Location
- westyorkshire
it dosnt have the amps otherwise id have used one of them
Matchless
I started with nothing, still have most of it left
- Messages
- 2,723
- Location
- Essex UK
but a Chinese 30A transformer will have a 20A output on a good day!
gaz1
Member
- Messages
- 19,390
- Location
- westyorkshire
have you got pics and a wiring diagram ?
DAPPH
as dyslexik as I'm daft
- Messages
- 7,329
- Location
- Near to Cross Hands Llanelli SouthWales GB
I'm starting to pay more attention to this thread as in six months time or so I hope to have a 16 x 32 foot fully paneled fibreglass equipment enclosure for my new mancupboard.
One of these simple heaters would be ideal for keeping it warm & dry throughout the year .
Can you have to have a head of fuel supplying or must it be pumped up from small refillable tank for safety reasons ...reason I ask is I have a 1200 litre tank whose out let is some four feet higher than where the mancupboard is going to be . Was thinking of a gravity feed to the pump via a proper heating oil filter set up over 45 mtrs long in a proper copper / plastic sleeved pipe .
Can any of you guys or gals tell me what the max length of the exhaust pipe can be . Any idea of the exhaust gas temp for I'm thinking of venting it out of a roof or high up vent similar to the sort of roof vent for an extractor fan or I can use a balance flue set of cool pipe work from our old oil boiler if needed .
What does the team think of having the completer burner in an external water proofed lidded container , having any controls inside the building and just piping in the heated clean hot air ?
Do these burners come complete with an over ridable time clock & /or a frost stat ?
One of these simple heaters would be ideal for keeping it warm & dry throughout the year .
Can you have to have a head of fuel supplying or must it be pumped up from small refillable tank for safety reasons ...reason I ask is I have a 1200 litre tank whose out let is some four feet higher than where the mancupboard is going to be . Was thinking of a gravity feed to the pump via a proper heating oil filter set up over 45 mtrs long in a proper copper / plastic sleeved pipe .
Can any of you guys or gals tell me what the max length of the exhaust pipe can be . Any idea of the exhaust gas temp for I'm thinking of venting it out of a roof or high up vent similar to the sort of roof vent for an extractor fan or I can use a balance flue set of cool pipe work from our old oil boiler if needed .
What does the team think of having the completer burner in an external water proofed lidded container , having any controls inside the building and just piping in the heated clean hot air ?
Do these burners come complete with an over ridable time clock & /or a frost stat ?
DAPPH
as dyslexik as I'm daft
- Messages
- 7,329
- Location
- Near to Cross Hands Llanelli SouthWales GB
Mmmmm ,
I too have a working when striped out old tower computer power supply unit sitting on a shelf in my current mancupboard .
Just to clarify do you mean put all the outputs in parallel , + to + & - to- ve in a big terminal block then take out a single fused + & - ve to the burner panel that will then give you the required start 12 volt start up current plus a bit more in total so nothing gets overloaded & hot?
