A new tig ac welder is available germany with 230 AMP and 230 v
https://www.hausundwerkstatt24.de/W...tal-WIG-Schweissinverter-fuer-Aluminium-230-A
https://www.hausundwerkstatt24.de/W...tal-WIG-Schweissinverter-fuer-Aluminium-230-A
- Thread starter MetalMonkey
- Start date
DavidL
Member
- Messages
- 181
- Location
- nr Wigan, Lancs - UK
Interesting: echoes of, but not the same as this
https://weldes.de/wig-acdc-schweiss...200acdc-multipro-inverter-schweissgeraet.html
https://weldes.de/wig-acdc-schweiss...200acdc-multipro-inverter-schweissgeraet.html
MikeyG1974
New Member
- Messages
- 9
- Location
- Wales, UK
Just an update I have managed to order the TIG, using Weldes.de I had to add to basket and go to checkout without signing in, then I could checkout by signing in during the checkout process not before.. Strange way of doing it but I was unable to add to basket while I was signed in..
Hood
I am obsessed.
- Messages
- 17,304
- Location
- Carnoustie, Scotland
Was it weldes or greyeagle or some other place you ordered from?
Weldes.de
Hood
I am obsessed.
- Messages
- 17,304
- Location
- Carnoustie, Scotland
send @www_weldes_de a private message and hopefully he can get you sorted.
I got a couple of emails, one for signing up as a customer, and an acknowledgement of the order for a pedal, Google translate gives me:
THANK YOU FOR YOUR ORDER FROM PEMAT S.C.! DETAILS TO YOUR ORDER Order: CKZAFSGZQ from 07.08.2020 18:50:49 Payment: Payment by card
No mention of a delivery date yet,
I’ve just ordered one from weldes.de. I had various success on ipad but all went ok on Firefox. Took a while to translate everything and only by emailing found out Vereinigtes Konigreich is uk 
. I didn’t have to sign in and got the confirmation email ok.
. I didn’t have to sign in and got the confirmation email ok.The Weldinger has 230 AMP
ThatsNotAWelder
New Member
- Messages
- 1
- Location
- Somerset, UK
Hello. First post from myself. Let's make it too long.
I also hit the 403 server misconfiguration issue on the weldes.co.uk website, so I took the risk, checked my credit card foreign transaction rate (well recommended, not all created equal), and placed the order on weldes.de for the Sherman 206P AC/DC with pedal bundle. I looked at their ebay store, but although the prices were similar, the shipping added on quite a bit. In the end, the credit cards I have all charged 2.99% foreign transaction fee, but at a better exchange rate than PayPal, so I ended up paying £10 more. I think. The card isn't showing the transaction yet, but even though I ordered it very late last night, UPS have sent an email to say they've been informed there is a shipment to be picked up! I know it's the welder (and Sherman V4 mask and an accessories kit with a selection of gas cups, collets, back caps and tungstens) because the sender is "PEMAT S.C". Delivery is specified as the 17th.
I figured it'll be the same spec as for voltage, and I knew it came with the wrong sort of mains plug anyway, so I was going to have to rewire that, or get an adaptor. But that's certainly something to be careful of when ordering from abroad.
I think I read on their site about how they don't/can't ship gas cannisters, partially because the continent has different standards for fittings.
So next I need the gas side of things (tubing, cannister, regulator, flow meter), gloves and an apron at least, and some filler rods. And to find a supplier of metal stock that isn't horribly expensive for small quantities. I think I'll do quite a bit of recycling- such as an old stainless steel dish rack. I'm looking at Adams Gas for the gas, they have a local distributor to me, but the only regulators they sell are for top valves, and all their hobby-sized cylinders are 90°! Otherwise, I'd be looking at https://www.adamsgas.co.uk/product/regulator-300-bar-single-stage-2-gauge-argon/ or https://www.adamsgas.co.uk/product/ae3005lx-sheilding-gas-regulator-mig-tig-welding/
I also hit the 403 server misconfiguration issue on the weldes.co.uk website, so I took the risk, checked my credit card foreign transaction rate (well recommended, not all created equal), and placed the order on weldes.de for the Sherman 206P AC/DC with pedal bundle. I looked at their ebay store, but although the prices were similar, the shipping added on quite a bit. In the end, the credit cards I have all charged 2.99% foreign transaction fee, but at a better exchange rate than PayPal, so I ended up paying £10 more. I think. The card isn't showing the transaction yet, but even though I ordered it very late last night, UPS have sent an email to say they've been informed there is a shipment to be picked up! I know it's the welder (and Sherman V4 mask and an accessories kit with a selection of gas cups, collets, back caps and tungstens) because the sender is "PEMAT S.C". Delivery is specified as the 17th.
I figured it'll be the same spec as for voltage, and I knew it came with the wrong sort of mains plug anyway, so I was going to have to rewire that, or get an adaptor. But that's certainly something to be careful of when ordering from abroad.
I think I read on their site about how they don't/can't ship gas cannisters, partially because the continent has different standards for fittings.
So next I need the gas side of things (tubing, cannister, regulator, flow meter), gloves and an apron at least, and some filler rods. And to find a supplier of metal stock that isn't horribly expensive for small quantities. I think I'll do quite a bit of recycling- such as an old stainless steel dish rack. I'm looking at Adams Gas for the gas, they have a local distributor to me, but the only regulators they sell are for top valves, and all their hobby-sized cylinders are 90°! Otherwise, I'd be looking at https://www.adamsgas.co.uk/product/regulator-300-bar-single-stage-2-gauge-argon/ or https://www.adamsgas.co.uk/product/ae3005lx-sheilding-gas-regulator-mig-tig-welding/
Hood
I am obsessed.
- Messages
- 17,304
- Location
- Carnoustie, Scotland
The quick release fittings arrived today so decided to crack on before the work starts 
Quality of them is much better than the eBay pics suggest.
Got one with a 3/8 BSP female thread for the Stealth, so that was quick and easy, just a bit of thread paste.
The Sherman required some dismantling but wasn't too hard once I figured out I also need to remove the handle. The Jasic Plasma doesn't require that as the handle comes away with the casing.
All fitted and no leaks
So now with the quick release on both Tigs and the adaptor plug/sockets I made for the Stealth, I can now fit any of my 3 torches to any machine
Quality of them is much better than the eBay pics suggest.
Got one with a 3/8 BSP female thread for the Stealth, so that was quick and easy, just a bit of thread paste.
The Sherman required some dismantling but wasn't too hard once I figured out I also need to remove the handle. The Jasic Plasma doesn't require that as the handle comes away with the casing.
All fitted and no leaks
So now with the quick release on both Tigs and the adaptor plug/sockets I made for the Stealth, I can now fit any of my 3 torches to any machine
chrisg3103
Forum Supporter
- Messages
- 784
So did the 6 - 4mm fit without too much bother?
reedx
Member
- Messages
- 190
- Location
- Consett, UK
The quick release fittings arrived today so decided to crack on before the work starts
Quality of them is much better than the eBay pics suggest.
View attachment 246007
Nice one. Was it the 6mm pipe fitting you went for for the Sherman?
Colin
they change the address for the uk people try www.weldes.co.uk
Hood
I am obsessed.
- Messages
- 17,304
- Location
- Carnoustie, Scotland
Yes, bit tight to get started but with needle nose pliers I got it pushed on no problem and tightening the nut up was easy by hand.
Yes, the 6/4 fitting which is for 6mm OD and 4mm ID tube.
Ebay link would be helpful please
Hood
I am obsessed.
- Messages
- 17,304
- Location
- Carnoustie, Scotland
Well, I never received an email, but the welder pitched up this lunchtime. I'm meant to be working, so no fun to be had opening it properly but it's been well packed and delivery was faster than I'd anticipated since I live in the far north of Scotland.
Now I just have to wait for some gas being delivered which will probably be next week. 
Now I just have to wait for some gas being delivered which will probably be next week. 
onlymeagain
Forum Supporter
- Messages
- 117
- Location
- Norfolk
Hi there, I currently have an R-Tech TIG160PDC TIG welder and was wondering what your opinions are on selling this and changing/upgrading to the Sherman 206p AC/DC? All thoughts and comments are welcome. 
