Cordless reciprocating saw is great for hacking out stumps.
- Thread starter God mode restorations
- Start date
DAPPH
as dyslexik as I'm daft
- Messages
- 7,134
- Location
- Near to Cross Hands Llanelli SouthWales GB
So are the bigger 240 volt 12 inch bladed sabre saws with a vicious toothed saw blade when run off a long strong cable or a small genny
DAPPH
as dyslexik as I'm daft
- Messages
- 7,134
- Location
- Near to Cross Hands Llanelli SouthWales GB
If you can , would you let me have a few lumps of the baytree if they are two inches or more thick & over a foot long for my pen turning hobby .
Happy to pay costs etc.
selectedgrub
Member
- Messages
- 3,346
- Location
- New Zealand
Today I made a wooden frame for an old BSA advertisement sign I painted.
Kram
Member
- Messages
- 7,030
- Location
- Sussex
Theres nothing suitable left of this one, I removed it last year and just the last bit of stump left.
finyuk2005
Member
- Messages
- 737
old metal oil drum or paint drum with the bottom cut out, stick it over the stump, fill of wood and coal and keep it burning!
nothing left of the stump in no time!
dont forget the marshmallows!
That’s a lot of hash he can make
Memmeddu
Member
- Messages
- 4,913
- Location
- Italia Sardegna
A thumbnail
Well not the best thumbnail ever but I can always change it if it doesn't work.
Right now I'm editing the new restoration video which took really too long but I'm an human being and I've had to deal with a bunch issues so it's a victory already.
Hopefully uploading this night as most of the video has been already edited.
Wish me good luck
Blobber
Member
- Messages
- 2,652
- Location
- lincolnshire
Looks great!View attachment 472187
A thumbnail
Well not the best thumbnail ever but I can always change it if it doesn't work.
Right now I'm editing the new restoration video which took really too long but I'm an human being and I've had to deal with a bunch issues so it's a victory already.
Hopefully uploading this night as most of the video has been already edited.
Wish me good luck
Awesome work
Memmeddu
Member
- Messages
- 4,913
- Location
- Italia Sardegna
Uploading after 5 hours of editing shrinking a total of 2 hours plus of clips into a 22 minutes video.View attachment 472187
A thumbnail
Well not the best thumbnail ever but I can always change it if it doesn't work.
Right now I'm editing the new restoration video which took really too long but I'm an human being and I've had to deal with a bunch issues so it's a victory already.
Hopefully uploading this night as most of the video has been already edited.
Wish me good luck
Another hour yet to upload and add last details using the computer and I can finally go to sleep
- Messages
- 13,438
- Location
- England
That is some tidy work!
DAPPH
as dyslexik as I'm daft
- Messages
- 7,134
- Location
- Near to Cross Hands Llanelli SouthWales GB
Finally made the non working compressor work ,made a new 15 foot mains lead for it as the one on it was well shot ( bit awkward as there was very little space to use a Philips screw driver to undo the terminals ,this even included using a z style off set Philips .
I made a squarish Delrin washer from square stock partly turned down to 24mm so it still retained some of the squareness so it's really grip able in my occasionally desensitized fingers .
Centrally drilled to 10mm & parted to 11 mm , then gently forced it on the drain down valve insert in the vice using a small socket as the anvil , the original one is 10,5 mm in dia & knurled but very very worn from where PO's have used pliers to undo and tighten it , put a new sealing " O " ring on the valve too as it was copiously seeping air .( why they used the pliers ??)
Went and collected the last connector to make up the compressor lead ..I should have purchased two females' and two male connectors right the start & got them delivered to my home along with the dehumidifier i purchased on Friday instead of faffing about driving to and from the local Screw Fix four times thinking differing types of connectors they had in stock would fit .
Now a fully working 150 psi compressor with 10mtr reinforced heavy rubber hose and an air pistol jet .
An air nailer or a riveter is now on the cards either as a donated repairable one or something from Santa in fishnets
I made a squarish Delrin washer from square stock partly turned down to 24mm so it still retained some of the squareness so it's really grip able in my occasionally desensitized fingers .
Centrally drilled to 10mm & parted to 11 mm , then gently forced it on the drain down valve insert in the vice using a small socket as the anvil , the original one is 10,5 mm in dia & knurled but very very worn from where PO's have used pliers to undo and tighten it , put a new sealing " O " ring on the valve too as it was copiously seeping air .( why they used the pliers ??)
Went and collected the last connector to make up the compressor lead ..I should have purchased two females' and two male connectors right the start & got them delivered to my home along with the dehumidifier i purchased on Friday instead of faffing about driving to and from the local Screw Fix four times thinking differing types of connectors they had in stock would fit .
Now a fully working 150 psi compressor with 10mtr reinforced heavy rubber hose and an air pistol jet .
An air nailer or a riveter is now on the cards either as a donated repairable one or something from Santa in fishnets
Dcal
Member
- Messages
- 3,969
- Location
- Antrim Northern Ireland
Very nice.
I'm repairing a similar drill. Similar as in, big drill with a three speed gearbox, however it's a wet core drill.
I suspect it's had a far harder life that yours and I need to change every bearing in it. There's lots and every one is fighting me.
I'll do a post when I get it back together but I won't be going into the detail you do.
Also, I won't be improving the aesthetics.
Memmeddu
Member
- Messages
- 4,913
- Location
- Italia Sardegna
That's huge compared to my Bosch, didn't know they spin that fast.
Mine have been only neglected but it was mechanically fine, a part of the missing speed selector lever.
It was already quiet before taking it a part with the intention to get the spindle out and solve the grease leakage from the spindle, but ended up leaving it there because I'd need an hydraulic press to do that.
So I've pretty much cleaned it up painted and polished, then I've used modern thicker grease and hopefully it will not leak that much.
It's more dictated by the niche, restoration videos have to be a complete transformation but off course I avoid to repair what's not broken like the bearings which are perfectly fine for example
Pete.
Member
- Messages
- 14,485
- Location
- Kent, UK
They were surely filled with oil or liquid grease. I don't know bit I will find out and report back.
