Today I acquired...........

[Rannsachair]

been looking for some reasonable quality lathe tools for my new Harrison M300, took a punt on an ebay Pelicase with Kennametal lathe tools only one other bidder so got for £107.51:

Quite large and heavy, certainly a lot bigger than I was expecting:

Dozens of inserts, not all Kennametal, still think it was a decent buy:

 

[Edward Teach]

Today I acquired some gurt castors to go on my engine test bench, the brake locks the wheel and the castor

View attachment 303800

Ditto on the brake cleaner pump spray, the only one that really works well

 

[The_Yellow_Ardvark]

This pressure lamp that runs on kerosene. UK made I believe.

AKA Tilly lamp,
Will run on paraffin as well.
Just make sure the pump and mantle are in good condition.
If that is ok and it still didn’t light. Then the vaporiser is dead.

 

[DennisCA]

I believe kerosene and paraffin are the same thing. It needs to be pre-heated with a torch that is missing, but I am thinking I will turn a cup from aluminium that I can fill with alcohol instead and use it for preheating.

 

[Munkul]

been looking for some reasonable quality lathe tools for my new Harrison M300, took a punt on an ebay Pelicase with Kennametal lathe tools only one other bidder so got for £107.51:

That's an awesome set! Looks like it will have most of what you'll ever need and a bargain too, each of those tools would have cost £30 or so each...

 

[Blobber]

From a recently deceased dentist who has known my family for the last 30 odd years.

View attachment 304358
View attachment 304359
View attachment 304360
Just got to plumb it in and run it up without popping it

I know dental appointments are still hard to come by but your not going anywhere near my mouth with that!

 

[Rannsachair]

That's an awesome set! Looks like it will have most of what you'll ever need and a bargain too, each of those tools would have cost £30 or so each...

Aye, I recon there is a few hundred worth of inserts and the bonus of another milling head.

 

[DanZac]

Is the gearbox on that side !

No it's hanging round the wrong way from the hoist. I never noticed until I'd taken that photo.

 

[Kram]

24 and 26mm mini sluggers.

Pardon our interruption...

 

[lotus_esprit_s1]

£10 the lot off eBay. There was a lot more dross that I have heaved in the skip

 

[Brad93]

If anyone needs discontinued Sandvik inserts hit me up.

 

[Brad93]

Or valenite for that matter

 

[Brad93]

The south east is gonna end up for sure in the sea. Redistributing some more iron today.

 

[Blobber]

The south east is gonna end up for sure in the sea. Redistributing some more iron today.

View attachment 304553 View attachment 304554

At least you wont float away, plenty of stuff to hold onto!

 

[Moose McAlpine]

View attachment 304554

Made by Cam Equipment?

 

[Blobber]

About 20yrs ago the old mans personal garage got broken into by some scum from the council estate behind, they took a few bits including his old Britool socket set and his spare toilet rolls!!
Anyway the insurance sorted it and replaced the socket set as well, hes now 96 the toilet rolls are long gone but hes a bit beyond using a socket set so its come home to get some use, it does
say its made in the UK but it doesnt feel as nice as the other older Britool set I have but its free!

 

[The_Yellow_Ardvark]

I believe kerosene and paraffin are the same thing. It needs to be pre-heated with a torch that is missing, but I am thinking I will turn a cup from aluminium that I can fill with alcohol instead and use it for preheating.

If you go that way, filling with cotton string, so the "Meths." has something to soak into.
You want a min of 4 minutes to a max of 8 mins of pre heat.

 

[Gragson]

Met @p0689109 today, nice to meet you mate

Got these lovely workmates, will get some 25mm ply at weekend and some legs, might even give them a coat on the press steel and wire brush the aly back.

 

[MattF]

I believe kerosene and paraffin are the same thing. It needs to be pre-heated with a torch that is missing, but I am thinking I will turn a cup from aluminium that I can fill with alcohol instead and use it for preheating.

Depends. We have both. Kerosene is a less? refined form of paraffin. Or, paraffin is a more? refined form of kerosene, whichever way suits.

 

[Brad93]

Made by Cam Equipment?

That's the one. Got a roebuck sticker on it too.

high pressure pump is working but not the low pressure.