Today I acquired...........

[Hood]

Womens Royal Army Corps

 

[DAPPH]

Really useful. Battery terminals and such like. I lent mine to a pal and he left it out in the rain

Nothing comes close really. The sort of thing you use once in a while but when you need it you need it

I picked up a 32 ounce lump of solid copper soldering iron for £1 about 35 years ago at a boot sale.. A week or so after getting it I took the header tank off the rad on my eldest daughter's boyfriend's ancient P reg Vauxhall Viva , cleaned out the clogged elements and re-soldered it back in place for a leak free job .. did the full top overhaul as well for it was a blown head gasket that caused the problem of the blocked rad in the first place.

My new wife of a few months was non too pleased that I used the gas hob to heat the iron or me using cardboard covered work tops as my work bench . She did like the smell of the melted resin flux though

 

[25.4_mechanic]

Womens Royal Army Corps

You're probably right in that it's the R that makes me think for sure that this logo is from your island/s.

I can't see an abbreviation with a prominent R at the beginning without thinking Royal ....

Carsten

--

 

[Arc Tourist]

Isn't that why marriage is classed as legal prostitution?

As I was reading this, my Wife was looking over my shoulder reading it also. Now she is thinking that fees may need to be applied.

 

[DAPPH]

Hello to all,

I have not yet got any further with the assignment of this company logo, so the question: Does anyone know this logo?

View attachment 330024

In any case, it does not seem to be Pratt&Whitney - as has been suggested here ...

Thank you

Carsten

--

I put antique diestock into my search engine thought I'd found a spanner type but elsewhere it has two legs , is there any chance that the other leg has been ground off & was polished to suit the rest of the housing?
Are your DE search engines liable to turn up something if you search for the technical German name equivalent ?

 

[Hood]

Today I acquired a couple of 10mm 4 flute carbide cutters with 1mm nose rad and an 8mm 3 flute carbide 90 degree chamfer mill.

I also got one of these, the very first of the HEX ezCAN's for the Africa Twin CR1100 which just became available a few days ago.

 

[DAPPH]

As I was reading this, my Wife was looking over my shoulder reading it also. Now she is thinking that fees may need to be applied.

Offer payment in kind instead and do the dishes . yeah I know .........they take much longer .

 

[Arc Tourist]

Offer payment in kind instead and do the dishes . yeah I know .........they take much longer .

I already do the dishes.

 

[25.4_mechanic]

is there any chance that the other leg has been ground off & was polished to suit the rest of the housing?

- will have another look for it, thx
- it'll get the de-rust treatment first

 

[Dr.Al]

Squander! Mr DHL and Mr Royal Mail both handed over packages this morning:

Looking forward to playing with these.

 

[Other Daniel]

Squander! Mr DHL and Mr Royal Mail both handed over packages this morning:

View attachment 330051

Looking forward to playing with these.

Workshop Heaven per chance ?

 

[Dr.Al]

Workshop Heaven per chance ?

Yup (except the LED light)

 

[Rannsachair]

Another Phil Irving book to add to my collection :

 

[The_Yellow_Ardvark]

Is it the bubble wrap that keeps you happy or the contents?

Not telling

 

[MikeBB1970]

This set was £22.99 today in Lidl.
It will just be used on my electronics table, low voltage projects ie: 9 to 12 volts stuff.

 

[MikeBB1970]

The set included this ! ?

Oh well, if they insist ..

 

[MikeBB1970]

This flooring watsit cutter was taken to the tip, sorry..recycling centre.

(It's not in my workshop) it's going to live in our works place. Old stables where three of us work.

I doubt very much that I will use it but someone will find it handy.

 

[Arc Tourist]

As I was reading this, my Wife was looking over my shoulder reading it also. Now she is thinking that fees may need to be applied.

I've been pontificating over this. What do you think I should charge her ?

 

[Blobber]

Today I acquired a couple of 10mm 4 flute carbide cutters with 1mm nose rad and an 8mm 3 flute carbide 90 degree chamfer mill.

View attachment 330041

I also got one of these, the very first of the HEX ezCAN's for the Africa Twin CR1100 which just became available a few days ago.

View attachment 330042

There cant be anything left to buy or make for this bike!

 

[slim_boy_fat]

What do you think I should charge her ?

I was going to ask what you had in mind as a figure, but didn't want to be responsible for your hospitalisation.