Today I acquired...........

[ajlelectronics]

A Devillbis PRO GPI gun with 1.4 and 1.8 caps.

A set of SATA disposable cups and filters.

But no piggin' way of fitting them together! I had seen SATA and related it to SATA drives, a standard. I made the daft assumption, as the advert was "no adapters required with SATA guns", that I didn't need anything else. Suppliers, bless them, have put an adapter in the post for me FOC.

 

[Wallace]

On the plus side of all this, the AA got the car back to our local garage, they blamed Gates due to a seized water pump, Gates have now agreed to cover all costs to get the car back on the road.

Good on Gates, that's customer service.

 

[Keith 66]

A Spotmatic spotwelder supposedly working before someone decided to scrap the arms & electrodes. Arrghhh! I have put a thread on the relavant section.

 

[tomsutton529]

Good on Gates, that's customer service.

Yeah It is. The bloke from the garage said that gates are footing the whole bill.. That was before they found 12 bent valves.

 

[GrumpyOne]

Not today but yesterday at the local car boot sale I managed to pick up a pair of Blacksmith tongs for £1 and a roller thing for 50p, I don't know what I'm going to do with the roller thing

 

[ajlelectronics]

Roll things?

 

[GrumpyOne]

Roll things?

Exactly, I don't have anything to roll at present, I'll have to go looking for things to roll.

 

[ajlelectronics]

Gets much harder as you get older, doesn't it? ;-)

 

[Farside]

Oh, a roller. When you need a small roller, for rolling things, you'll be glad to have it.

 

[dan.taylor.1]

Looks like it may be an ink roller for prints.

 

[GrumpyOne]

Looks like it may be an ink roller for prints.

That's what I thought, I have another one just like it left over from playing with an old Adana hand press, now I have two

 

[thinfourth]

Great you can roll two things at once

 

[ajlelectronics]

In your (my!) dreams!

 

[GrumpyOne]

Great you can roll two things at once

Three things, I just bought a J Roller off of fleabay for a £10 as that is really what I wanted in the first place.

 

[Keith 66]

Last night at the wildfowlers club auction, a dozen knife blanks, all sorts some are hand forged a few cut out of good steel, hunting & bowie style plus some utility & one stilleto blade. Tenner the lot, Bargain!
They will keep me busy over the winter evenings.

 

[the snooper]

a free robin 3.5hp engine, dumped, complete with petrol, crankshaft has a pulley on it with centrifugal clutch, I also have a 14cfm spare compressor pump so with It having the auto clutch im thinking it will be good to run the pump.

 

[captain-destructo]

a free robin 3.5hp engine, dumped, complete with petrol, crankshaft has a pulley on it with centrifugal clutch, I also have a 14cfm spare compressor pump so with It having the auto clutch im thinking it will be good to run the pump.

3.5hp might not be man enough for a 14cfm pump?

but the only way to find out is to make it!!!!
we want up-dates
.

 

[the snooper]

3.5hp might not be man enough for a 14cfm pump?

but the only way to find out is to make it!!!!
we want up-dates
.

has to be worth a go

 

[julianf]

...a new coffee table

(its been on the cards for a while, but its actually here now)

8kva. Will sit between my 6hp lister engine and the house, to regenerate the waveform, and supplement the supply, when the load outstrips what the generator can supply.

 

[CRB]

Back to mugs on the floor then.