Today I acquired...........

[8ob]

Rotary table for a fiver?

I am keeping some of this stuff back for myself, the rest with the exception of the gear folk have put their names on is going in the freebee section later with perhaps a donation to a childrens charity . Not quite sure how this is going to work with collecting the P+P and the mods with the number of item restrictions. Will probably have to group bits together or it will be a complete pain.

Bob

 

[Hopefuldave]

The bone pieces still glued to the one joint would indicate they are not surplus new stock, but...

They could be "service exchange" / "planned maintenance" - I worked in the op theatre in an orthopaedic hospital, quite a few replacements done when they came unglued and chewed up the top end of the femur and had to be removed / reamed out / replaced with a fatter one, I looked after the power tools... Some of which are quite elegant, some quite brutal

Dave H. (the other one)

 

[Hopefuldave]

Weak bleach is no good. I just put 1/4 neat bleach in and boiling water. Leave it for a while - then just leave it under the tap for 10 mins - no nasty taste at all.

Steradent....

Dave H. (the other one - and these are my own teeth, those remaining...)

 

[indy4x]

Steradent....

Dave H. (the other one - and these are my own teeth, those remaining...)

Bicarbonate of Soda

 

[MattF]

I will put your name on it Matt.

Cheers. Let me know what I owe you, and I'll sort payment.

 

[Shox Dr]

Saved this from the skip. Its a post office clock. 240v.

 

[MattF]

That's nice.

 

[Shox Dr]

That's nice.

Isn’t it. Bit of a search. Its a Gents C7 master clock. Worth a bit by the looks

 

[The_Yellow_Ardvark]

Saved this from the skip. Its a post office clock. 240v.

View attachment 151292
View attachment 151293
View attachment 151294

There should not only be a "Like" tab.
There should be a:
"Like and Want" tab.

 

[eLuSiVeMiTe]

is there a 4 jaw suitable for my lathe in there anywhere mr bob

What size do you need. Have a 6inch thats a bit too bit for my needs. No back plate.

 

[MikeBB1970]

The old stillson 18 that I posted a while ago, ( was rusted badly)

I followed

suit with some of the clever people on here and after an acid bath and a clean it is now serviceable.

Happy with that, I probably won't paint it ; it's just a good useable tool for taking to work.

 

[Welderpaul]

I have one already so you can have that one Paul. Will tip that box out today and take pics of the unwanted contents.

Bob

Excellent thanks - let me know what I owe you for it and the postage.

 

[The_Yellow_Ardvark]

@Tinbasherdan
@Parm

Gentlemen.
You asked. I tried, I hope I was successful.

 

[Tinbasherdan]

What size do you need. Have a 6inch thats a bit too bit for my needs. No back plate.

Lathes 11” swing so 6” is a bit on the small side, cheers though

 

[anto44]

After seeing so many recommendations for this stuff on here I decided to pick up a few tins. 3 tins and the gun was £50.

 

[Olderisbetter]

Spotted a nice wood and brass plane and setting out scribe at the local car boot only for display but for a £20 i was happy

 

[eLuSiVeMiTe]

Lathes 11” swing so 6” is a bit on the small side, cheers though

Nw mate.
Mine will swing a 6 but this i

s a bit tight.

Jaws are massive and overhang so much even open a small amount the will foul the bed.

 

[eLuSiVeMiTe]

Been and collected this for a ton.
Looks brand new tbh. A few bits missing and could do with some diag braces but cuts well.

 

[NathanPrince]

Picked this up the other day for £20, real heavy bit of kit

 

[brewdexta]

Picked this up the other day for £20, real heavy bit of kit

A steal for 20 notes, I have one too, its made by Dohm. A bit about it here and a bit more here from when I bought mine