Today I acquired...........

[Olderisbetter]

I went shopping yesterday and found this old hoe head, gave it a clean around potential logo areas and hey presto! It’s Whitehouse Bros of Cannock. This brand pre-dates Cornelius Whitehouse’s hedgehog brand. Very nice for $3, this will be from the turn of the century. I’ll clean it and put it back to use.

"old hoe head" and "cannock" so many bad things i could say, Was in Cannock today and its very fitting.

 

[The_Yellow_Ardvark]

A little find in a charity shop.

I liked the colours, Mini Me has "liberated" them already.



Oh Yes this.

 

[bigegg]

weavers shuttle?

 

[Craig-SM]

@Hood Glad you were impressed too, at £30 a bargain. I mentioned the connector was tight but pushing at an angle like in a twist motion and comes off easier. Maybe just needs breaking in but I’d prefer that to grease squirting out the sides.

 

[The_Yellow_Ardvark]

weavers shuttle?

Yes. I believe they are a southern pattern not a Lancastrian pattern.

But will find out when I get home.

 

[Shox Dr]

Idil have tool tidys in, never seen them in there before. Bought 2. Turns out theres a pair in the box, so even better vfm.

Look identical to the snapon I’d already have

View attachment 188063

Got round to using them today. Proper tidy

No its not OCD. I cant stand looking for gear.

 

[Hood]

Filling a piston grease gun with out a cartridge of grease .

The way you fill the old grease gun is important . Do it in stages pulling the piston back 1/2" AT A TIME & locking it with the clip or the chain . Loading the grease with a spatula like making an ice cream cone up with soft iced cream , making sure you don't put air in the grease . Some times it's worth giving the reservoir body lower edge a gentle tap down on the edge of a table as you fill each level as this helps get any air bubbles up to the top .

Having a warm grease & gun also helps .. loading a grease gun at minus 10 oC with solid grease is not often very successful .

I've often seen guys try and use the gun cylinder & piston as a syringe and suck the grease in as they push the body into the grease... they never seemed to have much success as they were always having to bleed the gun.

Thanks but I was actually meaning the normal cartridge guns, the type you get everywhere with the normal lever style action, just could never get a decent one.
The gun I had that was my dads was the type you are talking about and it worked very well, it was just the inconvenience of having to fill it rather than pop a cartridge in that made me give it away.

 

[Hood]

You can get bolt head type grease nipple and a special slide on adaptor for the grease nipple . All you do is side the adaptor across the bolt head till it homes and slide it off when you have greased up .

See this eBay number button head . " 180360306568 " . there are also hexagonal heads , . adaptors are around a tenner for two . . they certainly help when you have a hundred or more to do on one vehicle or bit of machinery . I liked the buttons for you can grease up at almost any angle with ease & they work well in plastics .

I actually have button head adapters but I don't think you can get the grease nipples in 1/4UNF although having said that I have never really looked.

 

[Arc Tourist]

Got round to using them today. Proper tidy
View attachment 189268
No its not OCD. I cant stand looking for gear.

I like the style of those. Will have to check my local Lidl store. Thanks for posting.

 

[Dieselman 63]

"old hoe head" and "cannock" so many bad things i could say, Was in Cannock today and its very fitting.

This one’s a Dutch hoe

Another area once full of industry now just a memory

 

[Dieselman 63]

Does the blade on the push hoe look as though it can be knocked out when it's well worn down and a new high carbon blade be inserted ?

I don’t think so.

 

[dobbslc]

With the cartridge guns can you change the type of grease over by just swapping the cartridge over and bleeding out the hose of the old grease? I have to grease the Surfs UJ's and prop shaft etc and if I remember correctly it takes two different types of grease which puts me right off having to clean out the old gun I have.

 

[Hood]

With the cartridge guns can you change the type of grease over by just swapping the cartridge over and bleeding out the hose of the old grease? I have to grease the Surfs UJ's and prop shaft etc and if I remember correctly it takes two different types of grease which puts me right off having to clean out the old gun I have.

Yes, just pull the rod out, unscrew the top, release the rod and the cartridge pops out. Pull the rod back down, pop in the new cartridge and screw the top on then release the rod and pump until the new grease comes out.

 

[dobbslc]

Thanks Hood. I might get one of those.

 

[DAPPH]

Got round to using them today. Proper tidy
View attachment 189268
No its not OCD. I cant stand looking for gear.

Agreed , Wow .........… it looks much more like a serious case of CDO

 

[DAPPH]

I actually have button head adapters but I don't think you can get the grease nipples in 1/4UNF although having said that I have never really looked.

Not trying to teach granny etc etc. if the equipment is less than 45 yrs old it may be a metric size , also check the size is not a BSP thread if it looks coarse like a whit worth size .

See this site https://www.lsengineers.co.uk/imperial-hexagon-head-tap-grease-nipples.html

I was looking for 1/4 UNF and ended up with BSF or the other way round( I 'v been to sleep since then ) as the first few threads fit each other well .

 

[Hood]

It is definitely 1/4 UNF, it is a common size for standard type grease nipples.

 

[Yamhon]

Picked up today; Clarke 151 TE, bunch of clamps, spare fixed lens helmet and a bunch of steel stock.

 

[mpats]

Managed to snag these out of the skip at work the other day, just need to get it stripped.

And this arrived today from MSC, in their latest offers it was down to £40. 150mm jaw width.

 

[8ob]

I acquired a worklamp to go with my Ferrex Aldi batteries today, saw it on the bay of thieves and thought i would try it. Looks like its been made on a 3d printer, its nice and bright , its also got a bit of weight behind it so doesn't fall over.

Bob