Sherman Tig (Jasic in disguise?)

[jhobson]

re: allegro.pl

My Polish friend says:


ok so they do ship internationally, they are sending orders within 2 days, there might be a slight delay to that because Poland closed their borders, so I am not sure how shipping works these days, however govt said they will reopen borders this saturday

it's extra 170PLN ~35gbp

 

[Chris_m89]

re: allegro.pl

My Polish friend says:


ok so they do ship internationally, they are sending orders within 2 days, there might be a slight delay to that because Poland closed their borders, so I am not sure how shipping works these days, however govt said they will reopen borders this saturday

it's extra 170PLN ~35gbp

Thanks for checking I've tried a few times but I don't think it's liking my payment method I might try one of the bank transfer option to see if that works

 

[chrisg3103]

Have you tried going through tecweld themselves? http://tecweld.pl/produkty/promocje/spawarka-inwertorowa-digitig-206p-acdc/

Not saying they are not in stock, but dont say they are out either

 

[eddie49]

Have you tried going through tecweld themselves? http://tecweld.pl/produkty/promocje/spawarka-inwertorowa-digitig-206p-acdc/

Not saying they are not in stock, but dont say they are out either

I pressed the Add to Basket ( "Dodaj do Koszyka" ) button, and then pressed Basket ( "Koszyk" ), and a 206P TIG was in the basket.

 

[chrisg3103]

Mate your following the sheep it won't be any worse . When I purchased my jasic and posted how good I thought it was nobody bothered until another member stripped a sherman down and then the rush started so yes they are loving them but its been what 2 weeks so ask again in 2 years. I would stick with what you got as you never know it may be even better

Its not that everyone was ignoring that the jasic is a lovely welder, its the cost that was insurmountable to the average joe (ie me) the only way i could afford the jasic was to take out finance which i nearly did, for your average hobby welder the cost is truly crippling! Im glad it paid off in a number of ways, big one being i have defiantly not had the use over the past 6 months to have justified the jasic cost, buyers remorse would of been huge!

So its not that we are being sheep and following the leader, people wanted the jasic but was out of reach. The sherman discovery on the other hand brings it within reach of us mere mortals, hence the gold rush

 

[chrisg3103]

I pressed the Add to Basket ( "Dodaj do Koszyka" ) button, and then pressed Basket ( "Koszyk" ), and a 206P TIG was in the basket.

good start, if your using chrome at least there should be a translate option? are you trying to navigate in polish?

 

[eddie49]

good start, if your using chrome at least there should be a translate option? are you trying to navigate in polish?

I'm not actually going to buy one ( I already have a 300kg Murex Transtig AC/DC 205 ), but yes, thanks to my Dad I can speak Polish.

 

[Chris_m89]

Thats what I've been doing it's not perfect but it helps alot with figuring out the page. I still haven't been able to get anywhere with card payments on allegro so I've given tecweld a try see if I get anywhere with them

 

[eddie49]

As far as I can tell, you have to register as a buyer with Allegro - like being an eBay member, then you can buy from any Seller who advertises on Allegro.
With the direct Tecweld.pl website, I have one 206P Sherman TIG in my basket. When I proceed to Checkout, there is no option for Country, only Postcode & City, so based on what I'm seeing on that screen, there's no international shipping available.

 

[jhobson]

Oops, I went one step futher on tecweld
"Please wait for contact from our sales representatives who will complete the transaction."
Need to conference in my Polish Pal to extricate me from this purchase.

 

[chrisg3103]

Oops, I went one step futher on tecweld
"Please wait for contact from our sales representatives who will complete the transaction."
Need to conference in my Polish Pal to extricate me from this purchase.

Maybe he can get you trade price never tried tecweld, but the way it was setup it looked non trade friendly, interesting to see what they do

 

[Chris_m89]

Maybe he can get you trade price never tried tecweld, but the way it was setup it looked non trade friendly, interesting to see what they do

Yeah I've done the same not heard anything back but I've also not had any luck with allegro joined as a member but still can't get past the payment screen same message every time let's see what tecweld have to say on the matter

 

[jhobson]

My Pal says techweld site suggest they own the the "Sherman-something" brand

 

[Pigeon_Droppings2]

There was a web site I came across (in English) selling out of Latvia...and they had stock...do you want me to see if I can find it again?

 

[Altintas]

Well the switch makes no difference, I tried several different ways and nothing worked.

2T pressed button and released then tried to adjust with +/- buttons
4T pressed button and released then tried to adjust with +/- buttons

2T pressed button and held then tried to adjust with +/- buttons
4T pressed button and held then tried to adjust with +/- buttons

Also tried all above whilst welding which is quite tricky for the 2T ones

Also tried with it in what they call remote mode and no difference, so looks like the Sherman can't use the extra buttons, would be interesting to know i the Jasic can but I don't suppose anyone with a Jasic has the torches with 3 or 4 buttons.

Up and Down Poti is digital the Inverter need can bus

 

[Chris_m89]

Features locked behind programming does not surprise me in these days everything getting like that

 

[Altintas]

View attachment 232231

NW5?

 

[Hood]

Up and Down Poti is digital the Inverter need can bus

Not really sure why canbus would be needed as the Parweld and the Stealth both work with buttons.
Whether the buttons work on the real Jasic I have no idea but certainly they don't seem to on the Sherman.

 

[Chris_m89]

Is that Latvian site called suvirink because I did spot that might investigate further

 

[Pigeon_Droppings2]

I haven't tried ordering from them ....but this is the site I remembered coming across. Maybe someone else has used them before (I haven't used them)....looks like they charge 25 euros delivery...but if it's a choice between 25 euros and not getting the welder...if the site goes down in the next day we'll know someone is watching this thread and shutting them down because it was a week or more ago that I came across them!

https://jobbi.lv/index.php?route=product/product&product_id=7906

Basically order at your own risk!