- Thread starter monkeymark
- Start date
Dieselman 63
Forklift Certified
- Messages
- 5,681
- Location
- Wellington, New Zealand
The right hand plug needs cleaning
The right hand plug viewing glass needs cleaning! I did decide to investigate as I swapped over the left plug and it gave similar results despite the test gap being strong. I’ll tidy up the machine later on.
Dieselman 63
Forklift Certified
- Messages
- 5,681
- Location
- Wellington, New Zealand
angellonewolf
Member
- Messages
- 8,467
- Location
- bristol england
^^^ nope thats no good its not rusty with paint flaking half the bits missing and in need of a rebuild take it back get a refund
nice looking mechine
nice looking mechine
Dieselman 63
Forklift Certified
- Messages
- 5,681
- Location
- Wellington, New Zealand
^^^ nope thats no good its not rusty with paint flaking half the bits missing and in need of a rebuild take it back get a refund
nice looking mechine
They did have one in the condition you state, albeit much cheaper than this one. The time and effort to find the missing parts though, would it be worth it?
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,614
- Location
- Going Away.
^^^ nope thats no good its not rusty with paint flaking half the bits missing and in need of a rebuild take it back get a refund
nice looking mechine
Just send it to us.
I am sure we will make good use of it.
eLuSiVeMiTe
Member
- Messages
- 16,441
- Location
- ......
Arrived this morning. Case sold already patchbay listed and the two compressors will be free.
steviec_lj
Rust Welding Professional
- Messages
- 2,806
- Location
- Barnetby, N.Lincs
That top comp a Behringer? Good bits of “Chinese” kit, can’t understand why everyone complained about them. Used to run racks of 30+ of them without issue..
eLuSiVeMiTe
Member
- Messages
- 16,441
- Location
- ......
Indeed.
Though il probably keep the dbx
Got quite a bit of behringer gear and can't fault it
- Messages
- 14,513
- Location
- UK
Just using the paint, or you have an old DB to paint?
daleyd
Member
- Messages
- 10,059
- Location
- Wrexham, North Wales
Just using the paint Paul, though now I’ve got the paint it’s be a shame not to get an old DB to go with it
- Messages
- 14,513
- Location
- UK
Just using the paint Paul, though now I’ve got the paint it’s be a shame not to get an old DB to go with it
Haha, sounds like the sort of buying protocol my mrs would employ.....I've bought the socks so now I need the shoes to go with them.
Nice paint to use, although i've never got on with their primer.
mr migwire
It's more fun with metal.
- Messages
- 1,874
- Location
- fife
Picked up this lot via a friend who is allways in the right place at the right time, all the adflos are working but the screen in the centre of the pic, side on has damage to the solar strip so may need a new lense unit, will have to get looking on eblag for one unluss someone want to do a swap for an adflo unit, some nice carbide burrs there to that look to be unused, not a bad late crimbo gift ...
some nice carbide burrs there to that look to be unused, not a bad late crimbo gift ...
eLuSiVeMiTe
Member
- Messages
- 16,441
- Location
- ......
h-dom
Member
- Messages
- 593
- Location
- Lincs
Had a bit of time this morning so stripped two broken electronic devices - a canon printer with a damaged pcb and an old microwave. Pulled four little electric motors from the printer and a 240v synchronous 4rpm motor from the microwave, now just thinking what to do with them.
steviec_lj
Rust Welding Professional
- Messages
- 2,806
- Location
- Barnetby, N.Lincs
Welding positioner with the 4rpm motor out of the microwave?
eLuSiVeMiTe
Member
- Messages
- 16,441
- Location
- ......
Memmeddu
Member
- Messages
- 4,754
- Location
- Italia Sardegna
So today I've bought something on AliExpress after almost 2 years .
Probably @bigegg remembered me that I should buy something from them once in awhile .
So what I've bought .
An AEG SDS drill switch which I should have bought back in 2017 when I've bought my welding helmet (always AliExpress) which I should write a review on the forum .
Chain oil pump for my Jonsered 2036 turbo (saving 20 euros)
And your continuous threads about rachet wire crimpers convinced me to buy one myself
I've chosen the LY-03A in red and blue colours to look like Knipex ones,I believe those could be called clones
Anyway not insulated terminals dies on them.
Next order I'll buy few dies for it and maybe the ferrule crimpers (same colours )
.Probably @bigegg remembered me that I should buy something from them once in awhile .
So what I've bought .
An AEG SDS drill switch which I should have bought back in 2017 when I've bought my welding helmet (always AliExpress) which I should write a review on the forum .
Chain oil pump for my Jonsered 2036 turbo (saving 20 euros)
And your continuous threads about rachet wire crimpers convinced me to buy one myself
I've chosen the LY-03A in red and blue colours to look like Knipex ones,I believe those could be called clones
Anyway not insulated terminals dies on them.
Next order I'll buy few dies for it and maybe the ferrule crimpers (same colours )
eLuSiVeMiTe
Member
- Messages
- 16,441
- Location
- ......
The intro into VR was fun.
Google earth was excellent.
Then I tried an iss spacewalk.
Very cool but when they boomed the crane in an arc with me on it my legs went and nearly fell over.
Look forward to letting the kids loose on it tomorrow
Wife caught on quick. She comes in and prods me. Scared the crap out of me
