sardine
Member
- Messages
- 3,667
- Location
- Buckinghamshire
What's it for?
Dunno, but if i need one ive got one.
- Thread starter monkeymark
- Start date
Dunno, but if i need one ive got one.
Wendelspanswick
Member
- Messages
- 6,486
It looks like a Fairlead, normally found on ships where a rope or line passes through a hole to stop it chafing but also used in bellringing where the bell rope passes through the ceiling of the ringing chamber into the bell chamber, again to stop it chafing.
Some of the towers round here have ones that look exactly like yours fitted into the ceilings, I will take a picture on my next practice.
Some of the towers round here have ones that look exactly like yours fitted into the ceilings, I will take a picture on my next practice.
Wendelspanswick
Member
- Messages
- 6,486
You can always sit on it when your piles are playing up!
Maker
Most folk just call me; Orange Joe
- Messages
- 10,521
- Location
- Don't ask questions
.
chester dylan
Member
- Messages
- 193
- Location
- chester uk
spent 2 hours today rumagaing is a skip full of radar gear compleatly leagl skip rumaging as i was at the scrap yard.
38 quid lighter in the walet and 108 kgs heavyer in the back of my mates car who hapend to turn up just at the right time and i came away with
a bunch of big 10kv caps some small 30kv caps a big motor driven vaireack a big 9.5kv transformer a couple of high voltage bridge rectefiers a pulse transformer unit (not to shure what that dose yet) and a fue outher bits.
38 quid lighter in the walet and 108 kgs heavyer in the back of my mates car who hapend to turn up just at the right time and i came away with
a bunch of big 10kv caps some small 30kv caps a big motor driven vaireack a big 9.5kv transformer a couple of high voltage bridge rectefiers a pulse transformer unit (not to shure what that dose yet) and a fue outher bits.
.
- Messages
- 22,458
- Location
- Birmingham
chester dylan
Member
- Messages
- 193
- Location
- chester uk
could be maybe i should go back on monday and get the rest of it and see what can be made i might start with trying to pop a banarner like photonicinduction on youtube proper nuter that guy
dan.taylor.1
General Tinkererer
- Messages
- 2,745
- Location
- Kendal, Cumbria
Got a cruesen (sp?) 3 phase linisher /polisher and 4 hi bay lights for nowt today. Few belts for the linisher and new bulbs for the lights too... Motor is siezed atm so may get swapped for a 240v one.
chester dylan
Member
- Messages
- 193
- Location
- chester uk
id keep it 3 phase and look for a vfd for it haveing vairable speed on a linisher is realy usefull
chester dylan
Member
- Messages
- 193
- Location
- chester uk
is that of red alert i rember playing that back in the day
Or perhaps one of these...
super noob
Member
- Messages
- 889
I bought another engine....
Woody.v8
Blue gluer
- Messages
- 4,164
- Location
- staffs
What are you putting in it now?
super noob
Member
- Messages
- 889
Not putting anything else in! Just wanted a spare block to use for mocking an ally intake and headers up on, building the sump and oil pump easily instead of lying under the vehicle etc 
Plus depending on the condition of the block I may use it to build a replacement
Plus depending on the condition of the block I may use it to build a replacement
Well you never posted the link from eBay on here. LolWhat did I do
Looks nice, what makes it hydraulic?
Not sure what makes it hydraulic.
This is not the actual one
but I think it's similar.
