dai
welsh and proud
- Messages
- 742
- Thread starter monkeymark
- Start date
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,608
- Location
- Going Away.
I must of been a good TYA.
Mrs TYA Brought me Breakfast in bed.
That aside we had a very pleasant day out, we decided to spend the day out at Lime Regis. What allowed me to detor and show her some of the shops I like to visit.
Mrs TYA did very very well. I got her some lovely Silver jewellery.
She also treated me to a few nice items.
No8. Raw Plug Drill. It was in the original box, but that fell to bits on the journey home. It is new old stock
A 1950's Meyer motorist torch, 2 x D Cells. The Top will flash after a few seconds and there were 2 spares bulbs in the body caps. The trader even threw in the new batteries.
Record Plough Plane, it is a Vampire plane. It drew blood.
Wooden Rebate plane with a set of blades. I think 2 are missing. Sadly a trader has tried to restore it and it is now seized solid. As I type it is in a meths vapour tank to remove the hard wax.
Stanly Guage, Yes I now have another one. But £1 it was a crime to leave it behind.
Mrs TYA Brought me Breakfast in bed.
That aside we had a very pleasant day out, we decided to spend the day out at Lime Regis. What allowed me to detor and show her some of the shops I like to visit.
Mrs TYA did very very well. I got her some lovely Silver jewellery.
She also treated me to a few nice items.
No8. Raw Plug Drill. It was in the original box, but that fell to bits on the journey home. It is new old stock
A 1950's Meyer motorist torch, 2 x D Cells. The Top will flash after a few seconds and there were 2 spares bulbs in the body caps. The trader even threw in the new batteries.
Record Plough Plane, it is a Vampire plane. It drew blood.
Wooden Rebate plane with a set of blades. I think 2 are missing. Sadly a trader has tried to restore it and it is now seized solid. As I type it is in a meths vapour tank to remove the hard wax.
Stanly Guage, Yes I now have another one. But £1 it was a crime to leave it behind.
Last edited:
Tinbasherdan
Bodger in chief
- Messages
- 7,240
- Location
- Bolton, England
dai
welsh and proud
- Messages
- 742
It's bigger than I expected to be...
Arc Tourist
Member
- Messages
- 4,885
- Location
- Wales
Today I acquired the #6 Denbeigh fly press with its original cast iron stand that I bought off of the bay about three weeks ago. Finally, today's weather looked good enough to make the long trip for collection. The seller was a nice guy who made every effort to make loading it in my van as quick and easy as possible; I didn't even need to bring an engine hoist. It was a great day out for my Wife and I, we love a road trip.
slim_boy_fat
Forum Supporter
- Messages
- 29,540
- Location
- Scottish Highlands
DAPPH
as dyslexik as I'm daft
- Messages
- 7,012
- Location
- Near to Cross Hands Llanelli SouthWales GB
Have a look on Thingiverse for parametric spur gears, they need (free) OpenSCAD to generate your choice of tooth-count, DP/Module etc. And there are even parametric bevel and helical gears...
Me, I use TurboCAD Pro for gear generation, cos I can
Dave H. (the other one)[/QUOTE
Thanks Dave the free Open Scad thing is where I get a bit confused . I've spent a few hours on Thingiverse but couldn't workout how to get the full data from it on to my printer. I've had a mild stroke a while back and retention of complex info is not easy at present . It might change though …. Do you have an" I d- 10- T5 " guide as to how to do it that you'd like to share with me and others on site ?
Currently I think I've become reasonably proficient with the basics of Fusion 360 and will be able to make my own parametric designed gears . Fusion 360 has a neat button called print , it slices, can put webs & supports on drawings and allow you to increase/ decrease the number of reference points the printer nozzle will visit amongst may other things .
This is my first self drawn print using Fusion 360 & a Joseph Prusa original i3 3D Mk 3 printer . It took about 30 hours of watching the videos then four attempts at getting the drawing done.. I had problems with constraints and some of the chamfers on angled planes till I spent half an hour removing everyone I could find .
Size of the part o 18. 2 mm tall by 22 mm long by 21.46 mm wide .
Now I'm almost ready to start prepping them to make a tree of three for lost low heat plastic casting . Casting the tree in standard plumbing brass using my home made furnace for the job as soon as I get the casting centrifuge made .
Dieselman 63
Forklift Certified
- Messages
- 5,681
- Location
- Wellington, New Zealand
I have a black lab who spends three days a week at the kennels - loves it! We joke it’s like Ibiza for dogs, he comes back knackered every day and keeps him quiet and sleepy for a few days
DAPPH
as dyslexik as I'm daft
- Messages
- 7,012
- Location
- Near to Cross Hands Llanelli SouthWales GB
I know it's off topic ..I apologise but think on this post afore you kennel your dogs & cats .I have a black lab who spends three days a week at the kennels - loves it! We joke it’s like Ibiza for dogs, he comes back knackered every day and keeps him quiet and sleepy for a few days
Never again will I kennel our dog here in South Wales .. Five years ago , the last time we put him in kennels was for three weeks , he was fuly uptodate with injections , worming & flea treatment.
I'd turned up unannounced a day early to collect him , the kennels owner was reluctant to let me have him three & then saying he hadn't been groomed , alarm bells rang big time .
The poor little beggar, whimpered , cried & yorped from the minute he heard me speaking , till he jumped in the back of the Sedona .. it was nearly two weeks before he's stop following me about like a shadow & that was with me training him all over again to stay whilst I moved a few feet away ..increasing the distance each time. As soon as I got out of sight he'd come tearing after me.
He was in a supposedly highly recommended five star kennel , I took him to the vets the next morning ….he'd lost six kg off his 27 kg weight and was a gibbering wreck , full of tape worm , diarrhoea and fleas. His coat was full of his poop. The 20 kg bag of his feed chicken & rice feed that would normally last him 30 days had all been used .. to feed the rest of the kennelled dogs no doubt
What he was crapping/ squirting out was rough milled undigested barley most likely sprayed with a week beef stock to get the dogs to eat it . We specifically asked that we give them his normal food for he has a wheat intolerance difficulty .
What he was crapping/ squirting out was rough milled undigested barley most likely sprayed with a week beef stock to get the dogs to eat it . We specifically asked that we give them his normal food for he has a wheat intolerance difficulty .
When our vet saw the state of him he was fair spitting with anger , suspecting that he'd never been out of his kennel & pen at any time for exercise or human contact , possibly not even being allowed to go into the pen just shut up in the kennel .
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,608
- Location
- Going Away.
£0:50p. Local charity shop, near the hardware shop where I was getting Linseed oil.
dai
welsh and proud
- Messages
- 742
thats an old spoke shave
Arc Tourist
Member
- Messages
- 4,885
- Location
- Wales
That looks like a Stanley #64 spoke shave.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,608
- Location
- Going Away.
Dieselman 63
Forklift Certified
- Messages
- 5,681
- Location
- Wellington, New Zealand
Tinbasherdan
Bodger in chief
- Messages
- 7,240
- Location
- Bolton, England
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,608
- Location
- Going Away.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,608
- Location
- Going Away.
Time to change your username to the yellow gannet
I would invite you over to view the shops and places I go to.
But I want to keep getting the bargains.
Dieselman 63
Forklift Certified
- Messages
- 5,681
- Location
- Wellington, New Zealand
No problem. I’m having a big clearout and lots of stuff is for sale. Sadly you’re a bit far away!
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,608
- Location
- Going Away.
You have a postal service.
Olderisbetter
Member
- Messages
- 3,741
- Location
- Wolverhampton
I would have planted my knuckles up that mans nose and asked him to call the police so they could investigate what was going on, These people should never be allowed near animals.
